Toyota RAV4 manuals

Toyota Sienna 2010-2020 Owners Manual: Device registration/connection flow

Toyota Sienna. Device registration/connection flow


Preparations to use wireless communication
The following can be performed using Bluetooth® wireless communication: A portable audio player can be operated and listened to via audio system Hands-free phone calls can be made via a cellu ...

Registering and connecting from the “Bluetooth* Setup” screen
To display the screen shown below, press the “SETUP” button and select “Bluetooth*” on the “Setup” screen. Select to connect the device to be used with audio system. Sele ...

Other materials:

Short in Front Passenger Side Squib 2nd Step Circuit
DTC B1185/57 Short in Front Passenger Side Squib 2nd Step Circuit DESCRIPTION The front passenger side squib 2nd step circuit consists of the center airbag sensor assembly and the front passenger airbag assembly. The circuit instructs the SRS to deploy when deployment conditions are met. ...

Throttle Actuator Control Motor Current Range / Performance
DESCRIPTION The ETCS (Electronic Throttle Control System) has a dedicated power supply circuit. The voltage (+BM) is monitored and when it is low (less than 4 V), the ECM determines that there is a malfunction in the ETCS and cuts off the current to the throttle actuator. When the volt ...

Removal
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINALV Caution: wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation. 2. Remove air fuel ratio sensor (for bank 2 sensor 1) (a) ...

© 2011-2020 Copyright www.tsienna.net