Toyota RAV4 manuals

Toyota Sienna 2010-2018 Owners Manual: Instrument cluster

Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarm: Unlock the doors using the entry function (vehicles with a smart key system) or wireless remote control. Vehicles without a smart ke ...

Warning lights and indicators
The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s various systems. For the purpose of explanation, the following illu ...

Other materials:

ABS Warning Light Remains ON
DESCRIPTION If any of the following is detected, the ABS warning light remains on. The skid control ECU connectors are disconnected from the skid control ECU. There is a malfunction in the skid control ECU internal circuit. There is an open in the harness between the combination meter an ...

Installation
1. INSTALL ROOF DRIP SIDE FINISH MOULDING When exchanging the clips Remove the tape that remains on the mounting surface of the vehicle body and then clean the surface with white gasoline. Using a heat light, heat up the clip installation surfaces of the vehicle body and moulding. ...

Cold Start Ignition Timing Performance
DESCRIPTION This monitor will run when the engine is started at -10 to 50°C (14 to 122°F) of the engine coolant temperature. The DTC will set after the engine idling for 13 seconds (2 trip detection logic). The DTC is designed to monitor the idle air control at cold start. When the ...

© 2011-2018 Copyright www.tsienna.net