Toyota RAV4 manuals

Toyota Sienna 2010-2018 Owners Manual: Maintenance

Cleaning and protecting the vehicle interior
The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces ...

Maintenance requirements
To ensure safe and economical driving, day-to-day care and regular maintenance are essential. It is the owner’s responsibility to perform regular checks. Toyota recommends the following maintenanc ...

Other materials:

Removal
HINT: Remove the RH side by same procedures with LH side. 1. REMOVE FRONT WHEEL 2. REMOVE FRONT FENDER LINER LH 3. REMOVE FRONT SPEED SENSOR LH (a) Disconnect the speed sensor connector. (b) Remove the sensor harness and clamp from the body. (c) Remove the 2 clamp bolts holding the ...

Intake Air Temperature Sensor Gradient Too High
DTC P0111 Intake Air Temperature Sensor Gradient Too High DESCRIPTION The Intake Air Temperature (IAT) sensor, mounted on the Mass Air Flow (MAF) meter, monitors the IAT. The IAT sensor has a built-in thermistor with a resistance that varies according to the temperature of the intake ...

Display Signal Circuit between Radio and Navigation Assembly and Television Camera Assembly
DESCRIPTION This is the display signal circuit of the television camera assembly. WIRING DIAGRAM INSPECTION PROCEDURE 1 CHECK HARNESS AND CONNECTOR (RADIO AND NAVIGATION ASSEMBLY - TELEVISION CAMERA ASSEMBLY) Disconnect the R10 connector from the radio and navigation assembly. &nbs ...

© 2011-2018 Copyright www.tsienna.net