Toyota RAV4 manuals

BMW 3 Series 2018-2022 Owners Manual: Concept, General information

Concept

Driver profiles can be created to store personal vehicle settings. If the vehicle is used by multiple drivers, each driver can create his personal driver profile. When a driver profile is selected, the vehicle will automatically apply the stored settings in the driver profile.

General information

Three personal driver profiles can be created.

In addition, a guest profile is available that can be selected by any driver. The guest profile is active when a personal driver profile has not been selected.

Changes to the vehicle settings are automatically stored in the active driver profile or in the guest profile.

The recognition via vehicle key and a digital key can be assigned to a driver profile so that the vehicle will apply the settings as soon as the driver unlocks the car. As soon as the vehicle detects the vehicle key or the digital key, the corresponding driver profile will be activated.

ConnectedDrive countries: The settings stored in the driver's profile can be synchronized with the personal BMW ConnectedDrive account. It is thereby possible to use these settings in other BMW vehicles as well.

Functional requirements

When switching the driver profile, the vehicle must move at a maximum of walking speed.

Welcome screen After the Control Display is switched on, the Welcome screen will be displayed.

The following actions can be carried out on the

Welcome screen:

This option is offered in new vehicle for a limited period of time.

As soon as the engine is started or any button is pressed, the Welcome screen will be hidden.

Driver profiles
...

Setup assistant
The setup assistant is offered in new vehicles for a limited period of time on the Welcome screen to configure the most important settings for the vehicle. "Getting started" Select to start the set-u ...

Other materials:

Light Sensor Circuit Malfunction
DTC B1244 Light Sensor Circuit Malfunction DESCRIPTION This DTC is output when failure in the light sensor circuit is detected. DTC No. DTC Detection Condition Trouble Area B1244 Malfunction of automatic light control sensor Open or short of a ...

Installation
1. INSTALL FUEL INJECTOR ASSEMBLY (a) Apply a light coat of spindle oil or gasoline to new Orings, and install them to each injector. (b) Apply a light coat of spindle oil or gasoline where the fuel delivery pipe contacts the O-ring. (c) Push the fuel injector while turning it to inst ...

Precaution
1. Handling precautions on steering system (a) Care must be taken when replacing parts. Incorrect replacement could affect the performance of the steering system and result in a driving hazard. 2. Handling precautions on srs airbag system (A) the vehicle is equipped with srs (supplemental res ...

В© 2011-2022 Copyright www.tsienna.net