Toyota RAV4 manuals

BMW 3 Series 2018-2023 Owners Manual: Concept, General information, Safety information

BMW 3 Series 2018-2023 Owners Manual / Safety / Intersection collision warning / Concept, General information, Safety information

Concept

The system may prevent some accidents with cross traffic at intersections and junctions. In the event of an accident, the system may reduce impact speed.

The system sounds a warning in the city speed range before an imminent collision and activates brakes independently, if needed.

General information

The system is controlled by the following sensors:

At intersections and junctions, a warning is issued when a danger of collision with crossing traffic is detected.

The system issues a two-phase warning of a possible risk of collision with vehicles at speeds above approx. 6 mph/10 km/h. The timing of warnings may vary with the current driving situation.

The Driver Attention Camera in the instrument cluster captures the driver's field of vision. Additionally, the system checks for visual impairments.

Field of vision and visibility also affect the timing of the warnings.

Detection range

Vehicles that cross your direction of travel can be detected by the system as soon as these vehicles enter into the detection range of the system.

Safety information

Warning The system cannot serve as a substitute for the driver's personal judgment in assessing visibility and traffic situation. There is a risk of accident.

Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.

Warning Indicators and warnings cannot serve as a substitute for the driver's personal judgment. Due to its limits, the system may not issue warnings or reactions, or these may be issued late or in a manner that is not consistent with their normal use. There is a risk of accident. Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.

Warning Due to system limits, individual functions can malfunction during tow-starting/towing with the Intelligent Safety systems activated. There is a risk of accident. Switch all Intelligent Safety systems off prior to tow-starting/towing.

Intersection collision warning
...

Overview
Button in the vehicle Intelligent Safety Camera The camera is installed near the interior mirror. Keep the windshield in front of the interior mirror clean and clear. Radar sensors The radar sensor ...

Other materials:

Sound Signal Circuit between Radio and Navigation Assembly and Television Display Assembly
DESCRIPTION The television display assembly sends an RSE sound signal to the radio and navigation assembly through this circuit. The sound signal that has been sent is amplified by the stereo component amplifier, and then is sent to the speakers. If there is an open or short in the circuit ...

Auto Up Operation does not Fully Close Power Window (Jam Protection Function is Activated)
DESCRIPTION If AUTO UP operation does not fully close the power window, the following conditions may be the cause.  The reset of the power window motor has not been completed, resulting in activation of the jam protection function.  The memory of the power window switch misse ...

Installation
1. INSTALL HEADLIGHT ASSEMBLY  Connect the connectors.  Install the headlight assembly with the bolt and 3 screws. 2. INSTALL FRONT BUMPER ASSEMBLY 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 4. VEHICLE PREPARATION FOR HEADLIGHT AIMING 5. PREPARATION FOR HEADLIGHT AIMI ...

В© 2011-2023 Copyright www.tsienna.net