Toyota RAV4 manuals

BMW 3 Series 2018-2022 Owners Manual: Control Display

Safety information

NOTICE Objects in the area in the front of the Control Display can shift and damage the Control Display.

There is a risk of damage to property. Do not place objects in the area in front of the Control Display.

Switching on/off automatically

The Control Display is switched on automatically after unlocking.

In certain situations, the Control Display is switched off automatically, for instance if no operation is performed on the vehicle for several minutes.

Switching on/off manually

The Control Display can also be switched off manually.

1. Tip the Controller up.

2. "Screen off".

Press the Controller or any button on the Controller to switch it back on again.

System limits

In the case of very high temperatures on the Control Display, for instance due to intense solar radiation, the brightness may be reduced down to complete deactivation. Once the temperature is reduced, for instance through shade or air conditioning, the normal functions are restored.

Control Display and Controller
Concept The iDrive functions are displayed on the Control Display. The Control Display can be operated using the Controller, touchpad, and touch screen. Overview Control Display with touchscreen C ...

Controller
General information The buttons can be used to open the menus directly. The Controller can be used to select menu items and enter the settings. Some iDrive functions can be operated using the touchp ...

Other materials:

Turn signal light switch
ON-VEHICLE INSPECTION 1. INSPECT TURN SIGNAL FLASHER CIRCUIT  Measure voltage between the terminals as shown in the chart below. Voltage Connect the connector to turn the signal flasher and turn the ignition switch ON, and inspect the wire harness side connector from t ...

Installation
1. INSTALL SHIFT LEVER ASSEMBLY (a) Install shift lever assembly to the vehicle with the 4 bolts. Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) NOTICE: Into datum hole of shift lever into datum pin of instrument lower. (b) Connect the 2 connectors to the shift lever assembly. ...

Low Battery Positive Voltage
DTC C1241/41 Low Battery Positive Voltage DESCRIPTION If there is a problem with the brake actuator assembly (skid control ECU) power supply circuit, the skid control ECU outputs the DTC and prohibits the ABS operation with the fail safe function. If the voltage supplied to the IG1 termina ...

В© 2011-2022 Copyright www.tsienna.net