Setting the date
Via iDrive:
1. "CAR".
2. "Settings".
3. "General settings".
4. "Date and time".
5. "Date:".
6. Turn the Controller until the desired day is displayed.
7. Press the Controller.
8. Make the settings for the month and year.
9. "OK".
Setting the date format
Via iDrive:
1. "CAR".
2. "Settings".
3. "General settings".
4. "Date and time".
5. "Date format:".
6. Select the desired setting.
The setting is stored for the driver profile currently used.
Language
Setting the language
Via iDrive:
1. "CAR".
2. "Settings".
3. "General settings".
4. "Language:".
5. "System language".
6. Select the desired setting.
The setting is stored for the driver profile currently used.
Setting the voice dialog
For voice dialog for the voice activation system.
Setting the units of measurement
Depending on the country version, you can set the units of measurement for some values, for instance consumption, distances, and temperature.
Via iDrive:
1. "CAR".
2. "Settings".
3. "General settings".
4. "Units".
5. Select the desired menu item.
6. Select the desired setting.
The setting is stored for the driver profile currently used.
Trip data settings
Concept
The intervals in which the trip data will be reset can be configured.
Resetting trip data
Via iDrive:
1. "CAR".
2. "Settings".
3. "General settings".
4. "Reset trip data".
5. Select the desired setting.
Removal
1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
Push the right side wall and then push the left wall
to release the stoppers.
Pull the glove compartment door sub-assembly
rearward to remove it.
2. REMOVE NO. 2 INSTRUMENT PANEL BOX
Disengage the 2 claws and 4 cl ...
Short in Front Passenger Side Squib 2nd Step
Circuit
DTC B1185/57 Short in Front Passenger Side Squib 2nd Step
Circuit
DESCRIPTION
The front passenger side squib 2nd step circuit consists of the center airbag
sensor assembly and the
front passenger airbag assembly.
The circuit instructs the SRS to deploy when deployment conditions are met.
...
Installation
HINT:
Install the RH side by the same procedure as the LH side.
1. INSTALL FRONT DISC BRAKE CYLINDER SLIDE BUSH
(a) Apply the lithium soap base glycol grease to a new
front disc brake cylinder slide bush.
(b) Install the cylinder slide bush to the bottom side of
the front disc brake cyli ...