BMW 3 Series 2018-2023 Owners Manual: External temperature
General information
If the indicator drops to +37 ℉/+3 ℃ or lower, a signal sounds.
A Check Control message is displayed.
There is an increased risk of ice on roads.
Safety information
Warning Even at temperatures above +37 ℉/+3 ℃ there can be a risk of icy roads, for instance on bridges or shady sections of the road. There is a risk of accident. Modify your driving style to the weather conditions at low temperatures.
Range
Concept
The range indicates the distance that can still be covered with the current fuel level.
General information
The estimated range available with the remaining fuel is permanently displayed in the instrument cluster.
With a low remaining range, a Check Control message is briefly displayed. With a dynamic driving style, for instance fast cornering, the engine function is not always ensured.
The Check Control message appears continuously below a range of approx. 30 miles/50 km.
Safety information
NOTICE With a driving range of less than 30 miles/50 km the engine may no longer have sufficient fuel. Engine functions are not ensured anymore. There is a risk of damage to property. Refuel promptly.
Display
.png)
The current range is displayed as
numerical value next to the fuel
gauge.
Shift point indicator
Concept
The shift lights indicate the upshift point at which
the best possible acceleration can be achieved.
Functional requirement
Shift lights are shown when the SPORT or
SPORT PLUS driving program ...
Service requirements
Concept
The function displays the service requirements
and the corresponding maintenance scopes.
General information
After switching on drive-ready state, the instrument
cluster briefly displays avail ...
Other materials:
Transfer oil
ON-VEHICLE INSPECTION
1. INSPECT TRANSFER OIL
(a) Remove the No. 1 plug and gasket.
(b) Check the oil level is within 0 - 5 mm (0 - 0.20 in.)
below the lowest end of the hole for No. 1 plug.
NOTICE:
When changing oil, recheck the oil level after
driving.
Excessively large or small ...
Engine Coolant Temperature Circuit Range / Performance Problem
DESCRIPTION
Refer to DTC P0115 (See page ES-133).
MONITOR DESCRIPTION
The ECT sensor is used to monitor the ECT. The ECT sensor has a built-in
thermistor with a resistance
that varies according to the temperature of the engine coolant. When the ECT
becomes low, the
resistance of the ...
DTC check / clear
1. CHECK DTC (USING INTELLIGENT TESTER)
Checking DTCs.
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON.
Read DTCs by following the prompts on the
tester screen.
HINT:
Refer to the intelligent tester operator's manual
for further details.
2. CLEAR DTC ...
