Toyota RAV4 manuals

BMW 3 Series 2018-2022 Owners Manual: Overview

Button in the vehicle

Driver assistance systems

Park assistance button

Ultrasound sensors

Ultrasound sensors of the PDC, for instance in the bumpers.

Functional requirements

Ensure full functionality:

Switching on/off

Switching on automatically

The system switches on automatically in the following situations:

You may switch automatic activation when obstacles are detected on and off.

Via iDrive:

1. "CAR".

2. "Settings".

3. "Driver Assistance".

4. "Parking and maneuvering".

5. If necessary, "Automatic PDC activation".

6. "Automatic PDC activation".

The setting is stored for the driver profile currently used.

Depending on equipment, an additional camera view is also switched on.

Automatic deactivation during forward travel

The system switches off when a certain driving distance or speed is exceeded.

Switch the system back on, if needed.

Switching on/off manually

Press the park assistance button.

The rearview camera image is displayed if the reverse gear is engaged when pressing the park assistance button.

Warning

Signal tones

General information

An intermittent tone indicates when the vehicle is approaching an object. For instance, if an object is detected to the left rear of the vehicle, a signal tone sounds from the left rear speaker.

The shorter the distance to the object, the shorter the intervals.

If the distance to a detected object is less than approx. 10 inches/25 cm, a continuous tone is sounded.

If there are objects in front of and behind the vehicle at the same time, with a distance smaller than approx. 10 in/25 cm, an alternating constant tone will sound.

Steptronic transmission: the intermittent tone and constant tone are switched off if the selector lever position P is engaged.

The intermittent tone is switched off after a short time when the vehicle is stationary.

Volume

The PDC signal tone volume can be adjusted.

Via iDrive:

1. "CAR".

2. "Settings".

3. "Driver Assistance".

4. "Parking and maneuvering".

5. "Volume PDC signal".

6. Set the desired value.

The setting is stored for the driver profile currently used.

Visual warning

Driver assistance systems

The approach of the vehicle to an object is shown on the Control Display. Objects that are farther away are already displayed on the Control Display before a signal sounds.

The display appears as soon as PDC is activated.

The range of the sensors is represented in the colors green, yellow and red when obstacles are detected.

Pathway lines are faded in for better estimation of the required space.

When the image of the rearview camera is displayed, the switch can be made to PDC or to a different view with obstacle markings as needed:

1. Press the Controller to the left, if needed.

2. For instance "Park. sensors only".

Cross traffic warning: depending on the equipment, it is warned in the PDC display against vehicles approaching in the front or rear from the side.

Concept, General information, Safety information
Concept PDC is a support when parking. Objects that you are approaching slowly in front of or behind the vehicle are indicated by signal tones and a display on the Control Display. Depending on the e ...

Depending on the equipment version: emergency brake function, Active PDC
Concept The emergency braking function of PDC initiates an emergency braking in case of acute risk of collision. General information This function may not be available. Contact your authorized dealer' ...

Other materials:

DSC Dynamic Stability Control
Concept Within the physical limits, the system helps to keep the vehicle on a steady course by reducing engine speed and by braking the individual wheels. General information DSC detects the following unstable driving conditions, for instance: Fishtailing, which can lead to oversteering. Loss of ...

Power back door opener / closer switch
INSPECTION 1. INSPECT SATELLITE SWITCH Inspect the resistance of the back door switch. Resistance If the result is not as specified, replace the switch. Apply battery voltage and check whether the switch illuminates. Standard HINT: Whether the switch illuminates or not wi ...

Managing mobile devices
General information After one-time pairing, the devices are automatically recognized and reconnected when standby state is switched on. After stored content on the SIM card or the mobile phone, such as contacts, has been detected, the data is transmitted to the vehicle and can be used via iD ...

В© 2011-2022 Copyright www.tsienna.net