BMW 3 Series 2018-2023 Owners Manual: Parking lights, low beams and roadside parking lights
General information
If the driver's door is opened when the drive-ready state is switched off, the exterior lighting is automatically switched off.
Parking lights
General information
The parking lights can only be switched on in the low speed range.
Switching on
.png)
Press the button on the light
switch element.
.png)
The indicator light in the
instrument cluster
lights up.
The vehicle is illuminated on all sides.
Do not use the parking lights for extended periods; otherwise, they might drain the battery and it would then be impossible to switch on drive-ready state.
Switching off
.png)
Press the button on the light
switch element
or switch on the drive-ready state.
After the drive-ready state is switched on, the automatic headlight control will be activated.
Low beams
Switching on
.png)
Press the button on the light
switch element.
The low beams illuminate when drive-ready state is switched on.
.png)
The indicator light in the
instrument cluster
lights up.
Press the button again to switch on the low beams when the standby state is switched on.
Switching off
Depending on the country variant, the low beams can be switched off in the low speed range.
.png)
Press the button on the light
switch element.
Roadside parking lights
When the vehicle is parked, a one-sided roadside parking light can be switched on.
.png)
Right roadside parking light on.
.png)
Left roadside parking light off.
Switching off
Switching off the roadside parking light:
.png)
Press the button on the light
switch element
or switch on the drive-ready state.
Lights and lighting
Switches in the vehicle
The light switch element is located next to the
steering wheel.
Front fog lights.
Lights off.
Daytime running lights.
Parking lights.
Automatic headlight control.
Adapti ...
Welcome lights
General information
Depending on the equipment, the exterior lighting
of the vehicle can be set individually.
Activating/deactivating
Via iDrive:
1. "CAR".
2. "Settings".
3. "Exterior lighting".
4. ...
Other materials:
Television Display Assembly Communication Error
INSPECTION PROCEDURE
1 IDENTIFY THE COMPONENT SHOWN BY THE SUB-CODE
Enter the diagnostic mode.
Press the "LAN Mon" switch to change to "LAN Monitor"
mode.
Identify the component shown by the sub-code.
HINT:
"110 (multi-display)" i ...
Changing/canceling the
recognition function
If another vehicle key or another digital key is to
be assigned to a driver profile, the current assignment
must be canceled first.
Via iDrive:
1. "CAR".
2. "Driver profiles".
3. Move the Controller to the right.
As an alternative for Steps 1 to 3, the profile
image can be tapped in the top stat ...
Rear Occupant Classification Sensor LH Collision
Detection
DTC B1787 Rear Occupant Classification Sensor LH Collision
Detection
DESCRIPTION
DTC B1787 is output when the occupant classification ECU receives a collision
detection signal sent by
the rear occupant classification sensor LH if an accident occurs.
DTC B1787 is also output when the front s ...
