Toyota RAV4 manuals

BMW 3 Series 2018-2022 Owners Manual: Selector lever positions

Drive mode D

Selector lever position for normal vehicle operation.

All gears for forward travel are activated automatically.

R is reverse

Engage selector lever position R only when the vehicle is stationary.

Neutral N

The vehicle may be pushed or roll without power, for instance in vehicle washes in selector lever position N.

Parking position P

General information

Selector lever position, for instance for parking the vehicle. The transmission blocks the drive wheels in selector lever position P.

Engage selector lever position P only when the vehicle is stationary.

P is engaged automatically

Selector lever position P is engaged automatically in situations such as the following:

Engaging selector lever positions

General information

To prevent the vehicle from creeping after you select a drive mode, maintain pressure on the brake pedal until you are ready to start.

Functional requirements

Only when the drive-ready state is switched on and the brake pedal is depressed is it possible to change from selector lever position P to another selector lever position.

The selection lever position P cannot be changed until all technical requirements are met.

Engaging selector lever position D, N, R

A selector lever lock prevents the following faulty operation:

1. Fasten driver's safety belt.

2. Press and hold the button to release the selector lever lock.

Driving

3. Push the selector lever in the desired direction, past a resistance point, if needed. The selector lever automatically returns to the center position when released.

Driving

Engaging selector lever position P

Driving

Press button P.

Steptronic transmission
Concept The Steptronic transmission combines the functions of an automatic transmission with the possibility of manual shifting, if needed. Safety information Warning An unsecured vehicle can begin t ...

Rolling or pushing the vehicle
General information In some situations, the vehicle is to roll without its own power for a short distance, for instance in a vehicle wash, or be pushed. Engaging selector lever position N 1. Switch on ...

Other materials:

Removing the second seats
Removing the second outside seats (Tip-up seats) Pull the armrests up. Pull the seatback adjustment lever and fold down the seatback. The cushion will tip up. Slide the seat forward to a lock position. Pull the release lever under the cushion and simultaneously lift the ...

Disassembly
1. REMOVE LOWER BALL JOINT ASSEMBLY FRONT LH (a) Remove the cotter pin and nut. (b) Using SST(s), remove the lower ball joint assembly front LH. SST 09628-62011 2. REMOVE FRONT WHEEL BEARING DUST DEFLECTOR NO.1 LH (a) Using a screwdriver, remove the bearing dust deflector NO. 1 LH ...

Inspection
1. INSPECT NO. 1 VALVE ROCKER ARM SUBASSEMBLY (a) Turn the roller by hand to check that it turns smoothly. HINT: If the roller does not turn smoothly, replace the valve rocker arm sub-assembly. 2. INSPECT VALVE LASH ADJUSTER ASSEMBLY NOTICE: Keep the lash adjuster free of dirt ...

В© 2011-2022 Copyright www.tsienna.net