BMW 3 Series 2018-2023 Owners Manual: Side collision mitigation
Warning function
Light in the exterior mirror
Prewarning
The dimmed light in the exterior mirror indicates
when there are vehicles in the blind spot or approaching
from behind.
Acute warning
If the turn signal is swi ...
Concept, General information, Safety information
Concept
The system helps to avoid imminent side collisions.
General information
Four radar sensors in the bumpers monitor the
space next to the vehicle from a minimum speed
of up to approx. 130 mph/2 ...
Other materials:
Inspection
1. INSPECT FRONT SPEED SENSOR
(a) Make sure that there is no looseness at the
connector lock part and connecting part of the
connector.
(b) Disconnect the speed sensor connector.
(c) Measure the resistance between terminals 1 and 2
of the speed sensor connector.
OK:
Resistance:
0.92 ...
Purpose of readiness tests
The On-Board Diagnostic (OBD II) system is
designed to monitor the performance of emissionrelated
components, and indicate any detected
abnormalities with DTCs (Diagnostic Trouble Codes).
Since various components need to be monitored in
different driving conditions, the OBD II system ...
Current Position Display does not Appear
INSPECTION PROCEDURE
1 CHECK RADIO AND NAVIGATION ASSEMBLY
Check if a map disc is inserted into the map disc slot.
OK:
A map disc is inserted
2 CHECK MAP DISC
Check that the map disc is not deformed or cracked.
OK:
No deformations or cracks appear on the map disc.
PROCEED ...
