BMW 3 Series 2018-2023 Owners Manual: Speed Limit Info

Speed Limit Info

Concept

Speed Limit Info shows the currently valid speed limit in the instrument cluster and, if necessary, the Head-up Display.

General information

The camera in the area of the interior mirror detects traffic signs at the edge of the road as well as variable overhead sign posts.

Traffic signs with extra symbols are considered and compared with the vehicle's onboard data.

The traffic sign will then be either displayed or ignored depending on the situation in the instrument cluster and the Head-up Display.

The system takes into account any information that is stored in the navigation system and also displays speed limits present on routes without signs.

Safety information

Warning The system cannot serve as a substitute for the driver's personal judgment in assessing visibility and traffic situation. There is a risk of accident.

Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.

Overview

Camera

The camera is installed near the interior mirror.

Keep the windshield in front of the interior mirror clean and clear.

Displaying Speed Limit Info

General information

Depending on the vehicle equipment, Speed Limit Info is displayed permanently in the instrument cluster or via iDrive.

Activating

Via iDrive:

1. "CAR".

2. "Settings".

3. "Driver Assistance".

4. "Driving".

5. "Speed Limit Assistance".

6. "Info on speed limits"

7. "Show current limit"

Display

Speed Limit Info

Current speed limit.

Depending on the equipment, Speed Limit Info not available.

If the detected speed limit has been exceeded, the indicator light will flash.

Adjusting

Via iDrive:

1. "CAR".

2. "Settings".

3. "Driver Assistance".

4. "Driving".

5. "Speed Limit Assistance".

6. Select the desired setting:

• "Warn when speeding": activate/deactivate the flashing of the Speed Limit Info display in the instrument cluster and, where applicable, the Head-up Display when the currently valid speed limit is exceeded.

  The warning that is issued when a speed limit is exceeded may depend on the Speed Limit Assist settings.

• "Excess speed display": the speed limit that is detected by the Speed Limit Info is displayed with a marking in the speedometer in the instrument cluster.

System limits

The system may not be fully functional and may provide incorrect information in the following situations:

• In heavy fog, wet conditions, or snowfall.
• When signs are fully or partially concealed by objects, stickers or paint.
• When driving very close to the vehicle in front of you.
• When driving toward bright lights or strong reflections.
• When the windshield in front of the interior mirror is fogged over, dirty or covered by a sticker, etc.
• If the camera has overheated and been temporarily switched off due to excessively high temperatures.
• In the event of incorrect detection by the camera.
• If the speed limits or road data stored in the navigation system are incorrect.
• If the speed limits vary with the time of day and the day of the week.
• In areas not covered by the navigation system.
• When roads differ from the navigation, such as due to changes in road routing.
• In case of electronic traffic signs.
• When passing buses or trucks with traffic signs applied to them.
• If the traffic signs are non-conforming.
• When signs that are valid for a parallel road are detected.
• In the presence of country-specific signs and road configurations.
• During calibration of the camera immediately after vehicle delivery.