BMW 3 Series 2018-2023 Owners Manual: Sport displays
Concept
The Sport displays especially support a sporty driving style.
Display on the Control Display
Overview
The following information is displayed:
- Boost pressure.
- Engine oil temperature.
- Acceleration power.
- Torque.
- Power.
Displays
Via iDrive:
1. "CAR".
2. "Driving information".
3. "Sport displays".
Display in the instrument cluster
The Sport displays can be displayed in form of two widgets in the instrument cluster.
The following widgets can be selected:
- Widget for torque and power.
- Widget for acceleration power.
Vehicle status
General information
The status can be displayed and actions performed for several systems.
Opening the vehicle status
Via iDrive:
1. "CAR"
2. "Vehicle status"
Information at a glance
.png)
"Flat Tire Monitor": status of
the
Flat Tire Monitor.
.png)
"Tire Pressure Monitor": status
of the Tire Pressure Monitor.
.png)
"Engine oil level": electronic
oil
measurement.
.png)
"Check Control messages":
displaying
stored Check Control
messages.
.png)
"Service schedule": displaying
service requirements.
.png)
"TeleService Call": Service
Request.
Selection lists
Concept
Lists can be displayed and, if necessary, used for
certain functions in the instrument cluster or the
Head-up Display.
Entertainment source.
Current audio source.
List of most recent telep ...
Head-up Display
Concept
This system projects important information into
the driver's field of vision, for instance the speed.
The driver can get information without averting
his or her eyes from the road.
General in ...
Other materials:
On-vehicle inspection
1. INSPECT BRAKE PEDAL HEIGHT
(a) Check the brake pedal height.
Pedal height from dash panel:
150.3 to 160.3 mm (5.917 to 6.311 in.)
NOTICE:
Do not adjust the pedal height. Doing so by
changing the push rod length will structurally
change the pedal ratio.
2. CHECK AND ADJUST STOP LIGHT S ...
Installation
1. INSTALL SHOCK ABSORBER ASSEMBLY REAR LH
(a) Install the rear spring bumper No.1 LH to the shock
absorber assembly LH.
(b) Support the rear axle beam assembly with a jack.
(c) Install the rear shock absorber assembly rear LH,
cushion retainer and nut to the rear axle beam.
(d) ...
Data list / active test
1. DATA LIST
HINT:
By the DATA LIST displayed by the intelligent tester, you
can read the value of the switch, sensor, actuator and so
on without removing any part. Reading the DATA LIST
as the first step in troubleshooting is one of the methods
to shorten the labor time.
Connect the ...
