Toyota RAV4 manuals

BMW 3 Series 2018-2022 Owners Manual: Turn signal

Turn signal in exterior mirror

When driving and during operation of the turn signals or hazard warning system, do not fold in the exterior mirrors, so that the signal lights on the exterior mirror are easy to see.

Using turn signals

Driving

Press the lever past the resistance point.

Triple turn signal activation

Lightly tap the lever up or down.

The triple turn signal duration can be adjusted.

Via iDrive:

1. "CAR".

2. "Settings".

3. "Exterior lighting".

4. "One-touch turn signal".

5. Select the desired setting.

The setting is stored for the driver profile currently used.

Signaling briefly

Press the lever to the resistance point and hold it there for as long as you want the turn signal to flash.

High beams, headlight flasher

Push the lever forward or pull it backward.

Driving

Parking brake
Concept The parking brake is used to prevent the vehicle from rolling when it is parked. Safety information Warning An unsecured vehicle can begin to move and possibly roll away. There is a risk of a ...

Wiper system
General information Do not use the wipers if the windshield is dry, as this may damage the wiper blades or cause them to become worn more quickly. Safety information Warning If the wipers start movin ...

Other materials:

Wiper switch
COMPONENTS REMOVAL 1. REMOVE STEERING COLUMN COVER 2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY  Disconnect the connector.  Using a screwdriver, disengage the claw and pull out the windshield wiper switch assembly. NOTICE: The claw will be broken if pressed hard. HINT ...

Evaporative Emission Control System Pressure
DTC P0450 Evaporative Emission Control System Pressure Sensor / Switch DTC P0451 Evaporative Emission Control System Pressure Sensor Range / Performance DTC P0452 Evaporative Emission Control System Pressure Sensor / Switch Low Input DTC P0453 Evaporative Emission Control System Pressure Sens ...

Removal
1. DRAIN POWER STEERING FLUID 2. REMOVE FRONT WHEEL RH 3. REMOVE FRONT FENDER APRON SEAL RH (See page EM-26) 4. REMOVE FAN AND GENERATOR V BELT (See page EM-6) 5. DISCONNECT NO. 1 FLUID RESERVOIR TO PUMP HOSE (a) Slide the clip and disconnect the No. 1 fluid reservoir to pump hose from t ...

В© 2011-2022 Copyright www.tsienna.net