Toyota RAV4 manuals

BMW 3 Series 2018-2022 Owners Manual: Vehicle features and options

BMW 3 Series 2018-2022 Owners Manual / Information / Vehicle features and options

This Owner's Manual describes all models and all standard, country-specific and optional equipment that is offered in the model series. Therefore, this Owner's Manual also describes and illustrates features and functions that are not available in a vehicle, for example because of the selected optional features or the country-specific version.

This also applies to safety-related functions and systems.

When using these functions and systems, the applicable laws and regulations must be observed.

For any options and equipment not described in this Owner's Manual, refer to the Supplementary Owner's Manuals.

Your BMW service center is happy to answer any questions that you may have about the features and options applicable to your vehicle.

Status of the Owner's Manual

Basic information

The manufacturer of your vehicle pursues a policy of constant development that is conceived to ensure that our vehicles continue to embody the highest quality and safety standards. In rare cases, therefore, the features described in this Owner's Manual may differ from those in your vehicle.

Validity of the Owner's Manual

Production of the vehicle

At the time of production at the plant, the printed Owner's Manual is the most current resource.

Due to updates after the editorial deadline, differences may exist between the printed Owner's Manual and the Integrated Owner's Manual in the vehicle.

Notes on updates can be found in the appendix of the printed Owner's Manual for the vehicle.

After a software update in the vehicle

After a vehicle software update - such as, a Remote Software Upgrade - the Integrated Owner's Manual for the vehicle will contain the latest information.

Using this Owner's Manual
Orientation The fastest way to find information on a particular topic is by using the index. An initial overview of the vehicle is provided in the first chapter. Validity of the Owner's Manual Produc ...

For Your Own Safety
...

Other materials:

Installation
1. INSTALL REAR NO. 2 SEAT ASSEMBLY LH  Place the rear No. 2 seat assembly LH in the cabin. NOTICE: Be careful not to damage the body.  Install the rear No. 2 seat assembly LH with the 2 bolts. Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf)  Install the locus cable with the ...

Shift Solenoid "E" Control Circuit
DESCRIPTION Shifting from 1st to 5th is performed in combination with "ON" and "OFF" operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR which are controlled by the ECM. If an open or short circuit occurs in either of the shift solenoid valves, the ECM cont ...

Disassembly
1. INSPECT UNDERDRIVE PLANETARY GEAR PRELOAD HINT: (See page AX-260) 2. REMOVE FRONT PLANETARY GEAR NUT (a) Using SST, loosen the staked part of the lock nut. SST 09930-00010 (09931-00010, 09931-00020), 09387-00050 (b) Place the underdrive planetary gear in a soft jaw vise. NOTIC ...

В© 2011-2022 Copyright www.tsienna.net