BMW 3 Series 2018-2022 Owners Manual: Voice activation system
Concept
The voice activation system can be used to operate functions with spoken commands. The system supports you with announcements during input.
The voice control system and the feedback it provides are not a substitute for the printed or Integrated Owner's Manual.
General information
- Functions that can only be used when the vehicle is stationary can only be operated via the voice activation system to a limited extent.
- The system includes special microphones on the driver side and the front passenger side.
- ›...‹ denotes commands to use with the voice activation system.
Functional requirements
- A language must be set via iDrive that is supported by the voice activation system.
- Always say commands in the language of the voice activation system.
Operation via touchscreen
General information
The Control Display is equipped with a touchscreen.
You can tap on menu items and widgets. Touch
the screen with your fingers. Do not use any objects.
Opening the main menu
Tap o ...
Activating the voice activation
system
General information
There are various methods for activating the
voice activation feature:
Press the button on the
steering
wheel.
Say the wake word ›Hello BMW‹ or a personal
wake word.
Th ...
Other materials:
Camshaft Position "B" - Timing Over
HINT:
If DTC P0014, P0015, P0024 or P0025 is present, check the VVT (Variable Valve
Timing) system.
DESCRIPTION
Refer to DTC P0013 (See page ES-87).
MONITOR DESCRIPTION
DTC P0014 and P0024
The ECM compares current valve timing with target valve timing, while the
engine is running a ...
The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or
Distorted
INSPECTION PROCEDURE
1 CHECK CELLULAR PHONE
Check if the other side can hear your voice properly.
OK:
Your voice can be heard correctly.
2 CHECK SETTINGS
Check if the mute switch is set to ON.
OK:
Mute switch is not set to ON.
3 CHECK SETTINGS
Enter the "Handsfree ...
Back Door Closer Switch Malfunction
DTC B2215 Back Door Closer Switch Malfunction
DESCRIPTION
This DTC is output when a malfunction occurs in the position switch in the
back door. This position switch
detects if the back door is in the latch position and sends a position signal to
the power back door ECU.
DTC No.
...
