Toyota RAV4 manuals

BMW 3 Series 2018-2022 Owners Manual: WiFi hotspot

Concept

Compatible devices with WiFi interface can use the Internet connection of the vehicle via the WiFi hotspot.

General information

Up to 10 devices can be connected to the WiFi hotspot simultaneously.

Functional requirements

Connecting a device to the Internet via the WiFi hotspot

Using the Internet for the first time via the WiFi hotspot requires registration and possibly a data volume purchase from a service provider.

Depending on the country version, data volume can be purchased via the connected mobile device or from the ConnectedDrive Store.

Via iDrive:

1. "COM".

2. "Mobile devices".

3. Move the Controller to the right.

4. "New device".

5. "Internet, apps".

Hotspot name and hotspot code are displayed on the Control Display.

6. Activate Internet usage via WiFi if necessary.

"Open settings".

7. Activate Internet usage.

"Internet connection".

8. Move the Controller to the left.

9. Search for WiFi networks on the mobile device.

Select network name on the device.

10.Enter hotspot code on the device and connect.

The device is displayed in the device list.

Additionally, a QR code will be displayed on the Control Display. Alternatively, this QR code can be used to pair the mobile device with the hotspot.

All devices connected via the hotspot use this data volume.

Deactivating Internet usage via the WiFi hotspot

Internet usage may be deactivated if the data volume is used up, for instance.

Via iDrive:

1. "COM".

2. "Mobile devices".

3. Move the Controller to the right.

4. "Settings".

5. "Internet connection".

6. Select the desired setting.

USB connection
General information Mobile devices with a USB port are connected to the USB interface. Mobile phones. Audio devices such as MP3 players. USB storage devices. Common file systems are supported. FA ...

Apple CarPlay preparation
Concept CarPlay allows certain functions of a compatible Apple iPhone to be used via Siri voice operation and iDrive. Functional requirements Compatible iPhone. iPhone 5 or later with iOS 7.1 or la ...

Other materials:

Diagnosis system
1. CHECK DLC3  The ECU uses ISO 15765-4 for communication. The terminal arrangement of the DLC3 complies with SAE J1962 and matches the ISO 15765-4 format. NOTICE: *: Before measuring the resistance, leave the vehicle as is for at least 1 minute and do not operate the igniti ...

Disassembly
1. REMOVE LOWER BALL JOINT ASSEMBLY FRONT LH (a) Remove the cotter pin and nut. (b) Using SST(s), remove the lower ball joint assembly front LH. SST 09628-62011 2. REMOVE FRONT WHEEL BEARING DUST DEFLECTOR NO.1 LH (a) Using a screwdriver, remove the bearing dust deflector NO. 1 LH ...

Data list / active test
1. DATA LIST HINT: Using the DATA LIST displayed on the intelligent tester, you can read the value of the switch, sensor, actuator, etc. without parts removal. Reading the DATA LIST as the first step of troubleshooting is one way to shorten the labor time. Connect the intelligent tester to ...

В© 2011-2022 Copyright www.tsienna.net