Toyota Sienna Service Manual: 2Gr-fe charging

Installation

1. INSTALL IGNITION SWITCH ASSEMBLY (a) Install the ignition switch with the 2 screws. (b) Install the ignition switch connector. 2. INSTALL STEERING COLUMN COVER LOWER (a) Attach the 4 claw ...

Charging system

...

Other materials:

Selecting, fast-forwarding and reversing tracks/files/songs
Selecting a track/file/song Press the “” or “” button on “SEEK•TRACK” or turn the “TUNE•SCROLL” knob to select the desired track/file/song number. To fast-forward or reverse, press and hold the “” or “” button on “SEEK•TRACK”. ...

Driver Side Seat Belt Warning Light does not Operate
DESCRIPTION When turning the ignition switch to the ON position, the combination meter assembly communicates with the supplemental restraint system by the multiplex communication system. Unless the driver side seat belt is fastened, the combination meter assembly will turn on the seat belt ...

Installation
HINT:  Use the same procedures for the RH side and LH side.  The procedures listed below are for the LH side. 1. INSTALL SIDE AIRBAG SENSOR LH Check that the ignition switch is off.  Check that the battery negative (-) terminal is disconnected. CAUTION: Afte ...