Toyota Sienna 2010-2022 Owners Manual: Adjusting the seat belt shoulder anchor height (front and second outside Tip-up seats)
- Push the seat belt shoulder anchor down while pressing the release button.
- Push the seat belt shoulder
anchor up.
Move the height adjuster up and down as needed until you hear a click.
Releasing and stowing the seat belt (for the third center seat)
To release plate “B”, press the
release button on buckle “B”.
To release plate “A”, insert the
key or plate “B” into
the hole on buckle “A”.
Retract the be ...
Seat belt pretensioners (front seats)
The pretensioners help the seat
belt to quickly restrain the occupant
by retracting the seat belt
when the vehicle is subjected to
certain types of severe frontal or
side collision or a vehic ...
Other materials:
Installation
1. INSTALL FRONT SEAT ASSEMBLY LH
Place the seat assembly in the cabin.
NOTICE:
Be careful not to damage the body.
Connect the connectors under the seat assembly.
Tighten the 2 bolts on the front side of the seat
assembly.
Torque: 37 N*m (375 kgf*cm, 27 ft.*lb ...
Concept, General information, Safety information
Concept
The system helps to avoid imminent side collisions.
General information
Four radar sensors in the bumpers monitor the
space next to the vehicle from a minimum speed
of up to approx. 130 mph/210 km/h.
The minimum speed is country-specific and is
displayed in the menu for the intelligent Saf ...
Diagnosis system
1. CHECK DLC3
(a) The vehicle's ECM uses the ISO 15765-4 for
communication. The terminal arrangement of the
DLC3 complies with SAE J1962 and matches the
ISO 15765-4 format.
HINT:
Connect the cable of the intelligent tester to the
DLC3, turn the ignition switch to the ON position
and atte ...
