Toyota Sienna 2010-2024 Owners Manual: Auxiliary boxes
- Type A
Push the lid.
- Type B
Push down the knob.
- Type C (if equipped)
- Type D
- Type E (if equipped)
- Type F
Lift the lid.
- Type G (if equipped)
Removing the second center seat.
- Type H (if equipped)
- Type I (if equipped)
- Type J (if equipped)
- Type K (if equipped)
Coin holder (type B)
Nickels, quarters and dimes can be stored separately
| WARNING Maximum storage weight (type A) Do not store items heavier than 0.4 lb. (200 g). Doing so may cause the auxiliary box to open and the items inside may fall out, resulting in an accident. |
Door pockets
Front
Rear
NOTICE
Rear: Make sure magazines are not bent
or protruding from the sliding door pockets.
Do not insert anything too big so that
the shape of the s ...
Other materials:
Disassembly
1. REMOVE 2ND BRAKE PISTON RETURN SPRING
SUB-ASSEMBLY
(a) Place SST on the return spring and compress the
return spring with a press.
SST 09387-00060
(b) Using a screwdriver, remove the snap ring.
(c) Remove the 2nd brake piston return spring.
2. REMOVE 2ND BRAKE PISTON
(a) Hold ...
Crankshaft Position - Camshaft Position Correlation
DTC P0016 Crankshaft Position - Camshaft Position Correlation
(Bank 1 Sensor A)
DTC P0017 Crankshaft Position - Camshaft Position Correlation
(Bank 1 Sensor B)
DTC P0018 Crankshaft Position - Camshaft Position Correlation
(Bank 2 Sensor A)
DTC P0019 Crankshaft Position - Camshaft Position Corr ...
Disassembly
1. REMOVE COOLER THERMISTOR NO.1 (for Automatic Air Conditioning System)
(a) Disengage the 2 claw fittings and the clamp and
remove the cooler thermistor No. 1.
2. REMOVE COOLING UNIT MOTOR SUB-ASSEMBLY WITH FAN
(a) Remove the 3 screws and the cooling unit motor
sub-assembly w/ fan.
3. ...
