DESCRIPTION
The power back door ECU controls the back door closer system. In response to the signals output from the switches related to the back door lock, the back door latch activates the closer motor.
HINT: The back door closer system operates regardless of whether the power back door main switch is ON / OFF.
WIRING DIAGRAM
INSPECTION PROCEDURE
1 INSPECT BACK DOOR LOCK
2 POWER SOURCE RESET
3 INSPECT BACK DOOR LOCK ASSEMBLY
OK: The latch turns to the open-latch position
OK
Resistance
Resistance
Resistance
4 CHECK WIRE HARNESS (BACK DOOR LOCK ASSEMBLY - POWER BACK DOOR ECU)
Resistance (Check for open circuit)
Resistance (Check for open circuit)
REPLACE POWER BACK DOOR ECU
Sound Signal Circuit between Radio Receiver and Stereo Component
Amplifier
DESCRIPTION
The radio receiver sends a sound signal to the stereo component amplifier
through this circuit.
The sound signal that has been sent is amplified by the stereo component
amplifier, and then is sent to
the speakers.
If there is an open or short in the circuit, sound cannot be h ...
Open in Side Squib LH Circuit
DTC B0116/48 Open in Side Squib LH Circuit
DESCRIPTION
The side squib LH circuit consists of the center airbag sensor assembly and
the front seat side assembly
LH.
This circuit instructs the SRS to deploy when deployment conditions are met.
DTC B0116/48 is recorded when an open circuit is ...
Wrong Disc/ Disc cannot be Read/ Wrong Disc/ Disc cannot be Read
DTC 62-41 Wrong Disc
DTC 62-42 Disc cannot be Read
DTC 63-41 Wrong Disc
DTC 63-42 Disc cannot be Read
DESCRIPTION
DTC No.
DTC Detecting Condition
Trouble Area
62-41
An unsuitable disc is inserted
CD
Radio receiver
62-42
Th ...