Toyota Sienna Service Manual: Bluetooth tel check mode

Toyota Sienna Service Manual / Navigation / Navigation system / Bluetooth tel check mode

HINT: Illustration may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed area may not be shown exactly the same as on the actual vehicle.

1. ENTER DIAGNOSTIC MODE

2. BLUETOOTH TEL CHECK

BLUETOOTH TEL CHECK

Select "Bluetooth TEL Check" from the "Diagnosis MENU" screen.

3. BLUETOOTH CHECK

BLUETOOTH CHECK

Select "Bluetooth Check" from the "Bluetooth Handsfree Check Menu" screen

BLUETOOTH CHECK

Select "Serial Communication Log" from the "Bluetooth Check Menu" screen.

BLUETOOTH CHECK

The communication log data in the display ECU are displayed on this screen.

HINT: The displayed data can be used as a reference.

BLUETOOTH CHECK

Select "Software Version" from the "Bluetooth Check Menu" screen.

BLUETOOTH CHECK

Check the software version of the Bluetooth module.

Screen Description:

Display	Contents
General Version / *1	General software version of Bluetooth module If any of the API version, upper stack version, and low stack version is updated, the general version is upgraded
API Version / *2	API software version is displayed.
Upper Stack Version / *3	Upper Stack version is displayed
Lower Stack Version / *4	Lower Stack version is displayed.

HINT: This function is controlled by the built-in display ECU.

4. HANDSFREE VOICE QUALITY SET

HANDSFREE VOICE QUALITY SET

Select "Handsfree Voice Quality Set" from the "Bluetooth Handsfree check Menu" screen.

HANDSFREE VOICE QUALITY SET

Check the handsfree voice level.

Screen Description:

Display	Contents
Received voice level adjustment / *1	Setting possible for the voice level received from Bluetooth compatible phones.
Sent voice level adjustment / *2	Setting possible for the voice set to Bluetooth compatible phones.

HINT: This function is controlled by the built-in display ECU.

NOTICE: "Voice Quality Type" should not be changed.

Display check mode

HINT: This mode checks the color display on the display. Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed a ...

Navigation check mode

HINT: This mode displays GPS satellite information. Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas ...

Other materials:

Engine Coolant Temperature Circuit Range / Performance Problem
DTC P0116 Engine Coolant Temperature Circuit Range / Performance Problem DESCRIPTION Refer to DTC P0115 DTC No. DTC Detection Condition Trouble Area P0116 ECTs as listed below are nearly same (2 trip detection logic): ECT when engine is start ...

Operation check
1. DOOR LOCK FAIL-SAFE When a malfunction in the door control switch (manual switch, interlocked with key operation) has been detected, door lock/unlock operation becomes disabled. 2. CHECK ELECTRICAL DOOR LOCK OPERATION Check the basic function. Check that a ...

Terminals of ECU
1. CHECK INSTRUMENT PANEL J/B ASSEMBLY (MULTIPLEX NETWORK BODY ECU) Disconnect the B6, B7 and B9 ECU connectors. Disconnect the 1A, 1C, 1L and 1K J/B connectors. Measure the voltage and resistance between each terminal of the wire harness side connectors and body gro ...