Toyota RAV4 manuals

Toyota Sienna Service Manual: Canister

Components

Components

On-vehicle inspection
1. INSPECT FUEL CUT RPM (a) Increase the engine speed to at least 3500 rpm. (b) Use a sound scope to check for injector operating sounds. (c) Check that when the throttle lever is released, i ...

Removal
1. REMOVE CHARCOAL CANISTER PROTECTOR (a) Remove the 6 bolts and charcoal canister protector. 2. REMOVE CHARCOAL CANISTER ASSEMBLY (a) Disconnect the fuel tank vent hose from the charcoal cani ...

Other materials:

Identification of noise source
1. Radio Description Radio frequency band  Radio broadcasts use the radio frequency bands shown in the table below Service area The service areas of AM and FM broadcasts are vastly different. Sometimes an AM broadcast can be received very clearly but an FM st ...

Combination Meter ECU Communication Stop
DTC B1271 Combination Meter ECU Communication Stop DESCRIPTION DTC B1271 is output when communication between the combination meter and the multiplex network gateway ECU stops for more than 10 seconds. DTC No. DTC Detection Condition Trouble Area B1271 ...

Inspection
1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY  Resistance inspection  Using an ohmmeter, measure the resistance between the terminals. Resistance: 6.9 to 7.9 Ω at 20C (68F) If necessary, replace the camshaft timing oil control valve assembly. &nbs ...

В© 2011-2024 Copyright www.tsienna.net