Toyota RAV4 manuals

Toyota Sienna Service Manual: CD Abnormal/ Excess Current/ Tray Insertion / Ejection Error/ CD Abnormal/ Excess Current/ Tray Insertion / Ejection Error

Toyota Sienna Service Manual / Audio / visual / Audio and visual system / Diagnostic trouble code chart / CD Abnormal/ Excess Current/ Tray Insertion / Ejection Error/ CD Abnormal/ Excess Current/ Tray Insertion / Ejection Error

DTC 62-44 CD Abnormal

DTC 62-48 Excess Current

DTC 62-50 Tray Insertion / Ejection Error

DTC 63-44 CD Abnormal

DTC 63-48 Excess Current

DTC 63-50 Tray Insertion / Ejection Error

DESCRIPTION

DTC No.

DTC Detecting Condition

Trouble Area

62-44 Operation error in the CD mechanism Radio receiver
62-48 Excess current is present in the CD player
62-50 Malfunction in insertion/ejection system
63-44 Operation error in the CD mechanism
63-48 Excess current is present in the CD changer
63-50 Malfunction in insertion/ejection system

INSPECTION PROCEDURE

HINT: After the inspection is completed, clear the DTCs.

1 CLEAR DTC

  1. Clear the DTCs

2 RECHECK DTC

  1. Recheck for DTCs and check if the same trouble occurs again.

HINT: If DTCs are detected frequently, replace the radio receiver.

OK: Malfunction disappears

END

CD-ROM Abnormal/ CD-ROM Abnormal
DTC 62-43 CD-ROM Abnormal DTC 63-43 CD-ROM Abnormal DESCRIPTION DTC No. DTC Detecting Condition Trouble Area 62-43 CD-ROM operation is abnormal CD R ...

Eject Error/ Elevator Error/ Clamp Error/ Eject Error/ Elevator Error/ Clamp Error
DTC 62-45 Eject Error DTC 62-51 Elevator Error DTC 62-52 Clamp Error DTC 63-45 Eject Error DTC 63-51 Elevator Error DTC 63-52 Clamp Error DESCRIPTION DTC No. DTC Detecting Con ...

Other materials:

How to proceed with troubleshooting
NOTICE: DTCs for the CAN communication system are as follows: U0073, U0100, U0122, U0123, U0124, U0126 and U1101. HINT: If U0235 or U1102 is output alone, the CAN communication is normal 1 CHECK AND CLEAR DTCS HINT: CAN communication DTCs are output when there is an open or short in any ...

Fail-safe chart
1. AUTO CANCEL FUNCTION (FAIL-SAFE FUNCTION): HINT: If a system malfunction occurs, the applicable DTCs will appear on the multi-information display. In some cases, a DTC will be set due to weather or vehicle operating conditions, this does not indicate a system malfunction.  E3 (i ...

Intermediate Shaft Speed Sensor "A"
DESCRIPTION This sensor detects the rotation speed of the counter gear. By comparing the counter gear speed signal (NC) with the direct clutch speed sensor signal (NT), the ECM detects the shift timing of the gears and appropriately controls the engine torque and hydraulic pressure according ...

В© 2011-2024 Copyright www.tsienna.net