Toyota Sienna Service Manual: CD-ROM Abnormal/ CD-ROM Abnormal

Toyota Sienna Service Manual / Audio / visual / Audio and visual system / Diagnostic trouble code chart / CD-ROM Abnormal/ CD-ROM Abnormal

DTC 62-43 CD-ROM Abnormal

DTC 63-43 CD-ROM Abnormal

DESCRIPTION

DTC No.	DTC Detecting Condition	Trouble Area
62-43	CD-ROM operation is abnormal	CD Radio receiver
63-43	CD-ROM operation is abnormal	CD Radio receiver

INSPECTION PROCEDURE

HINT: After the inspection is completed, clear the DTCs.

1 CHECK IF A PROPER CD IS INSERTED

Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, burred, or otherwise defective.

OK: Normal CD

HINT:

Translucent or uniquely-shaped CDs cannot be played.
CDs with adhesive paper labels should not be played.
Commercial audio CDs can be played.
CD-DA files on CD-ROMs, CD-Rs, and CD-RWs can be played.
MP3 and WMA files on CD-ROMs, CD-Rs, and CDRWs can be played.
For details on playable CDs, refer to the Owner's Manual.

2 REPLACE CD WITH ANOTHER AND RECHECK

Replace the CD with another and recheck.

Replace the CD with another normal one.
Clear the DTCs.
Recheck for DTCs and check if the same trouble occurs again.

OK: Malfunction disappears

END

Wrong Disc/ Disc cannot be Read/ Wrong Disc/ Disc cannot be Read

DTC 62-41 Wrong Disc DTC 62-42 Disc cannot be Read DTC 63-41 Wrong Disc DTC 63-42 Disc cannot be Read DESCRIPTION DTC No. DTC Detecting Condition Trouble Area 62 ...

CD Abnormal/ Excess Current/ Tray Insertion / Ejection Error/ CD Abnormal/ Excess Current/ Tray Insertion / Ejection Error

DTC 62-44 CD Abnormal DTC 62-48 Excess Current DTC 62-50 Tray Insertion / Ejection Error DTC 63-44 CD Abnormal DTC 63-48 Excess Current DTC 63-50 Tray Insertion / Ejection Error DESCRIPTION ...

Other materials:

Open in Side Squib RH Circuit
DTC B0111/44 Open in Side Squib RH Circuit DESCRIPTION The side squib RH circuit consists of the center airbag sensor assembly and the front seat side airbag assembly RH. The circuit instructs the SRS to deploy when deployment conditions are met. DTC B0111/44 is recorded when an open circ ...

DTC check / clear
HINT: Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle. If the system cannot enter the diagnostic mode, inspect all AVC-LAN communication ...

DTC check / clear
1. DTC CHECK (USING SST CHECK WIRE) Check the DTCs (Present trouble code). Turn the ignition switch ON, and wait for approximately 60 seconds. Using SST, connect terminals TC and CG of the DLC3. SST 09843-18040 NOTICE: Connect the terminals to the correct p ...