INSPECTION PROCEDURE
1 CHECK CURRENT CONDITIONS
RESULT
2 CHECK USING ANOTHER CELLULAR PHONE
HINT:
OK: The system functions.
USE A BLUETOOTH COMPATIBLE CELLULAR PHONE
3 CHECK USING ANOTHER BLUETOOTH COMPATIBLE VEHICLE
HINT: Depending on the version, some Bluetooth compatible cellular phones cannot be used.
OK: The system functions
USE A BLUETOOTH COMPATIBLE CELLULAR PHONE
4 CHECK CELLULAR PHONE
HINT: Some versions of Bluetooth compatible cellular phones may not function.
OK: The phone is Bluetooth compatible.
5 CHECK CELLULAR PHONE
HINT: When the battery is low, registration or directory transfer cannot be done.
OK: A call can be made from the cellular phone.
REPLACE RADIO AND NAVIGATION ASSEMBLY
Short to B+ in Curtain Shield Squib LH Circuit
DTC B1168/86 Short to B+ in Curtain Shield Squib LH Circuit
DESCRIPTION
The curtain shield squib LH circuit consists of the center airbag sensor
assembly and the curtain shield
airbag assembly LH.
The circuit instructs the SRS to deploy when deployment conditions are met.
DTC B1168/86 is ...
Installation
1. INSTALL STEERING PAD
Support the steering pad with one hand as shown in
the illustration.
Connect the 2 connectors to the steering pad.
NOTICE:
When handling the airbag connector, take care
not to damage the airbag wire harness.
Connect the horn connector.
...
Installation
1. INSTALL REAR DIFFERENTIAL SIDE GEAR SHAFT BOLT
(a) Install the bolt tightening the nut through the plate
washer.
2. INSTALL REAR DRIVE SHAFT ASSEMBLY LH
HINT:
(See page DS-26)
3. INSTALL REAR AXLE SHAFT NUT LH
HINT:
(See page DS-26)
4. INSTALL REAR SPEED SENSOR LH
HINT:
(See page D ...