Toyota RAV4 manuals

Toyota Sienna 2010-2024 Owners Manual: Changing the rear setting

Adjusting the temperature setting

  1. Press the “REAR” button (indicator and rear temperature on the display on).
  2. Turn the “REAR TEMP” dial clockwise to increase the temperature and counterclockwise to decrease the temperature.

    The air conditioning system switches between individual (the lower side indicator on the “SYNC” button is off) and simultaneous (the lower side indicator on the “SYNC” button is on) modes each time the “SYNC” button is pressed.

Adjusting the fan speed

Press “” on
to increase the fan speed and “
to decrease the fan speed.

Press to turn the fan off.


Changing the air outlets

Press the “REAR MODE” button.

The air outlets switch each time the button is pressed. (

Using the automatic mode
Press the “AUTO” button (“AUTO” appears on the display). Adjust the temperature setting. To stop the operation, press . Automatic mode indicator If the fan speed setting or air flow ...

Other functions
Switching between outside air and recirculated air modes Press . The mode switches between outside air mode ( appears on the display) and recirculated air mode ( appears on the display) each ...

Other materials:

Using the steering wheel switches
The steering wheel switches can be used to operate a connected cellular phone. Operating a telephone using the steering wheel switches Volume switch Increase/Decrease the volume Press and hold: Continuously increase/ decrease the volume Cursor switch Select a list/t ...

Driving Position Memory Switch Circuit (w/ Memory)
DESCRIPTION The seat memory switch sends signals to the outer mirror control ECU LH via the multiplex communication system to memorize a given seat position. This memory system does not use a position sensor. The seat position is detected by counting pulses that are output when the motor tu ...

Installation
1. INSTALL BACK DOOR GLASS  Clean and shape the contact surface of the vehicle body.  Using a knife, cut away any rough adhesive on the contact surface of the body to ensure the appropriate surface shape. HINT: Leave as much adhesive on the body as possible. & ...

© 2011-2024 Copyright www.tsienna.net