Toyota Sienna Service Manual: Crankshaft position sensor

Installation

1. INSTALL VVT SENSOR (for Bank 2 Exhaust Side)  Install the VVT sensor with the bolt. Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)  Connect the VVT sensor connector. 2. INSTALL VVT ...

Removal

1. REMOVE COMPRESSOR AND MAGNETIC CLUTCH 2. REMOVE CRANKSHAFT POSITION SENSOR  Disconnect the crankshaft position sensor connector.  Remove the bolt, and then remove the cranksh ...

Other materials:

Gauges and meters
The displayed content may differ depending on the type of meter. Vehicles with monochrome display Vehicles with color display Tachometer Displays the engine speed in revolutions per minute Multi-information display Presents the driver with a variety of driving-related d ...

Removing the second seats
Removing the second outside seats (Tip-up seats) Pull the armrests up. Pull the seatback adjustment lever and fold down the seatback. The cushion will tip up. Slide the seat forward to a lock position. Pull the release lever under the cushion and simultaneously lift the ...

Short to B+ in Door System Communication Bus Malfunction/ Short to GND in Door System Communication Bus Malfunction
DTC B1214 Short to B+ in Door System Communication Bus Malfunction DTC B1215 Short to GND in Door System Communication Bus Malfunction DESCRIPTION DTCs B1214 and B1215 are output when a short to +B or the body ground occurs on the communication bus. Detecting this condition disables all the ...