Toyota RAV4 manuals

Toyota Sienna Service Manual: Data list / active test

1. READ DATA LIST

HINT: Using the intelligent tester's DATA LIST allows switch, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

  1.  Connect the intelligent tester with CAN VIM to the DLC3.
  2.  Turn the ignition switch ON.
  3.  Read the DATA LIST.

BODY:

BODY

BODY

2. PERFORM ACTIVE TEST

HINT: Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time.

The DATA LIST can be displayed during the ACTIVE TEST.

  1.  Connect the intelligent tester with CAN VIM to the DLC3.
  2.  Turn the ignition switch ON.
  3.  Perform the ACTIVE TEST.

BODY:

BODY

Diagnosis system
1. CHECK DLC3  The vehicle's ECU uses ISO 15765-4 for communication protocol. The terminal arrangement of the DLC3 complies with SAE J1962 and matches the ISO 15765-4 format. ...

All Doors cannot be Locked / Unlocked at Once
DESCRIPTION The body ECU receives a switch signal from the master switch, the door control switch, the driver door key cylinder and the passenger door key cylinder and then drives the door lock ...

Other materials:

Installation
1. INSTALL RADIO NO. 2 BRACKET  Install radio No. 2 bracket with the 4 screws. 2. INSTALL RADIO NO. 1 BRACKET  Install radio No. 1 bracket with the 4 screws. 3. INSTALL RADIO RECEIVER  Connect the connector.  Install the radio receiver with the 4 scr ...

On-vehicle inspection
1. INSPECT BACK WINDOW (DEFOGGER WIRE) NOTICE:  When cleaning the glass, wipe the glass along the wire using a soft and dry cloth. Take care not to damage the wires.  Do not use detergents or glass cleaners including abrasive ingredients.  When measuring voltage, wr ...

Operation check
1. DETECTION RANGE MEASUREMENT AND INDICATOR CHECK  Turn the IG switch ON.  Move the shift lever to the R position (when the back sonar and rear clearance sonar is checked).  With front clearance sonar: Move the shift lever to the N position (when the front clearance son ...

В© 2011-2024 Copyright www.tsienna.net