Toyota Sienna Service Manual: Differential case

Reassembly

1. INSTALL UNDERDRIVE CLUTCH DRUM O-RING (a) Coat a new O-ring with ATF, and install it to the underdrive clutch drum. NOTICE: Make sure that the O-ring is not twisted or pinched. 2. INSTALL ...

Disassembly

1. REMOVE FRONT DIFFERENTIAL RING GEAR (a) Place matchmarks on the front differential ring gear and differential case. (b) Remove the 14 bolts. (c) Using a plastic hammer, tap on the f ...

Other materials:

Short in Rear Curtain Shield Squib RH Circuit
DTC B1630/83 Short in Rear Curtain Shield Squib RH Circuit DESCRIPTION The rear curtain shield squib RH circuit consists of the center airbag sensor assembly and the curtain shield airbag assembly RH. The circuit instructs the SRS to deploy when deployment conditions are met. DTC B1630/83 ...

Transmission Fluid Temperature Sensor "A"
DESCRIPTION The ATF (Automatic Transmission Fluid) temperature sensor converts the fluid temperature into a resistance value which is input into the ECM. The ECM applies a voltage to the temperature sensor through ECM terminal THO1. The sensor resistance changes with the transmission f ...

Installation
1. INSTALL BACK DOOR GLASS  Clean and shape the contact surface of the vehicle body.  Using a knife, cut away any rough adhesive on the contact surface of the body to ensure the appropriate surface shape. HINT: Leave as much adhesive on the body as possible. & ...