Toyota Sienna Service Manual: Disassembly
1. REMOVE CENTER CLUSTER MODULE KNOB NO.1 (for Manual Air Conditioning System)
(a) Remove the center cluster module knob No. 1.
2. REMOVE CENTER CLUSTER MODULE KNOB NO.2 (for Manual Air Conditioning System)
(a) Release the 2 claws fittings and remove the center cluster module knob No. 2.
NOTICE: Take care not to break the claws on the knob.
3. REMOVE AIR CONDITIONER AMPLIFIER ASSEMBLY (for Manual Air Conditioning System)
(a) Remove the plate.
(b) Release the lock of the connector and disconnect the cable.
(c) Remove the 4 screws, and the heater control housing.
(d) Remove the 4 screws, and the air conditioner amplifier assembly.
4. REMOVE AIR CONDITIONER AMPLIFIER ASSEMBLY (for Automatic Air Conditioning System)
(a) Release the 8 claw fittings and remove the 4 screws and the heater control housing.
(b) Disconnect the 2 connectors.
(c) Remove the 5 screws and the air conditioner amplifier assembly.
5. REMOVE INTEGRATION CONTROL AND PANEL BULB (for Manual Air Conditioning System)
(a) Remove the integration control & panel bulb.
6. REMOVE HEATER BLOWER SWITCH (for Manual Air Conditioning System)
(a) Remove the 3 nuts, and the 3 washers.
(b) Release the 6 claw fittings and remove the 5 screws and printed wire integration board sub-assembly.
(c) Remove the screw and the heater blower switch.
7. REMOVE PRINTED WIRE INTEGRATION BOARD SUB-ASSEMBLY (for Automatic Air Conditioning System)
(a) Remove the 12 screws and the printed wire integration board sub-assembly.
8. REMOVE CLOCK ORNAMENT
(a) Remove the clock ornament
9. REMOVE CENTER CLUSTER MODULE KNOB NO.5 (for Automatic Air Conditioning System)
10. REMOVE CENTER CLUSTER MODULE KNOB NO.6 (for Automatic Air Conditioning System)
Removal
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL
CENTER NO.1 (See page IP-8)
2. REMOVE INSTRUMENT CLUSTER FINISH PANEL
CENTER NO.2
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
HINT:
(See page AX-146 for U15 ...
Reassembly
1. INSTALL CENTER CLUSTER MODULE KNOB NO.6
(for Automatic Air Conditioning System)
2. INSTALL CENTER CLUSTER MODULE KNOB NO.5
(for Automatic Air Conditioning System)
3. INSTALL CLOCK ORNAMENT
4. ...
Other materials:
Installation
1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2 Exhaust
Side)
Apply a light coat of engine oil to the new O-ring and
install it to the camshaft timing oil control valve.
Install the camshaft timing oil control valve
assembly with the bolt.
Torque: 10 N ...
Command list
Some recognizable voice commands and their actions are shown
below as examples.
Basic
Command
Action
“Help”
Prompts voice guidance to offer examples of commands
or operation methods
“Go Back”
Returns to the previous screen
Phone
...
Subscription
After you have signed the Telematics Subscription Service Agreement
and are enrolled, you can begin receiving services.
A variety of subscription terms is available for purchase. Contact your
Toyota dealer, or push the “SOS” button in your
vehicle for further subscription details.
Safety ...
