Toyota RAV4 manuals

Toyota Sienna Service Manual: Disassembly

Toyota Sienna Service Manual / Seat / Front seat assembly (for Flat Type) / Disassembly

1. REMOVE OCCUPANT CLASSIFICATION ECU

2. REMOVE FRONT SEAT CUSHION SHIELD INNER RH

  1.  Remove the screw.
  2.  Using a screwdriver, disengage the claws and remove the cushion shield inner.

HINT: Tape the screwdriver tip before use.

3. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

  1.  Disconnect the connectors.
  2.  Remove the nut and inner belt assembly.

4. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

  1.  Using a screwdriver, disengage the claws and remove the reclining adjuster release handle.

HINT: Tape the screwdriver tip before use.

5. REMOVE FRONT SEAT CUSHION SHIELD RH

  1.  Remove the screw.
  2.  Using a screwdriver disengage the claws and remove the cushion shield.

HINT: Tape the screwdriver tip before use.

6. REMOVE FRONT SEAT TRACK COVER RH FRONT INNER

  1.  Remove the clip, 2 screws and seat track cover front inner.

7. REMOVE FRONT SEAT TRACK COVER RH FRONT OUTER

  1.  Remove the clip, 2 screws and seat track cover front outer.

8. REMOVE FRONT SEAT INNER RH ARMREST ASSEMBLY

REMOVE FRONT SEAT INNER RH ARMREST ASSEMBLY

  1.  Using a screwdriver, remove the armrest cap.

    HINT: Tape the screwdriver tip before use.

  2.  Remove the bolt and armrest assembly.
  3. ) Remove the 2 washers and 2 spacers.

9. REMOVE FRONT SEATBACK SHIELD LH

  1.  Using a screwdriver, disengage the claws and remove the reclining adjuster release handle.

    HINT: Tape the screwdriver tip before use.

  2.  Remove the screw and seatback shield.

10. REMOVE FRONT SEATBACK SHIELD RH

HINT: Use the same procedures for the RH side and LH side.

11. REMOVE FRONT SEATBACK BOARD RH

REMOVE FRONT SEATBACK BOARD RH

  1.  Disengage the clips.
  2.  Remove the seatback board by pulling it out in the arrow mark direction shown in the illustration.

12. REMOVE FRONT SEATBACK SPRING ASSEMBLY

  1.  Remove the 4 bolts and seatback spring assembly together with the seatback cover.

13. REMOVE FRONT SEATBACK LOCK SUB-ASSEMBLY LH

  1.  Remove the 2 bolts and seatback lock assembly.

14. REMOVE FRONT SEATBACK LOCK SUB-ASSEMBLY RH

  1.  Remove the reclining connecting pipe.
  2.  Remove the 2 bolts and seatback lock assembly.

15. REMOVE FRONT SEAT HINGE COVER LH

  1.  Using a screwdriver, disengage the claws and remove the seat hinge cover.

HINT: Tape the screwdriver tip before use.

16. REMOVE FRONT SEAT HINGE COVER RH

HINT: Use the same procedures for the RH side and LH side.

17. REMOVE FRONT SEAT HEADREST SUPPORT

REMOVE FRONT SEAT HEADREST SUPPORT

  1.  Disengage the claws and remove the 2 headrest supports.

18. REMOVE FRONT SEATBACK COVER RH

REMOVE FRONT SEATBACK COVER RH

  1.  with Side airbag: Remove the nut and disengage the separate type front seatback cover bracket.
  2.  Remove the hog rings and seatback cover together with the pad.
  3.  Remove the hog rings and seatback cover.

19. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

  1.  Disengage the hook and remove the seat cushion cover together with the pad.
  2.  Remove the hog rings and seat cushion cover.

20. REMOVE RECLINING ADJUSTER INSIDE COVER LH

REMOVE RECLINING ADJUSTER INSIDE COVER LH

  1.  Remove the screw and the reclining adjuster inside cover LH (lower).

21. REMOVE RECLINING ADJUSTER INSIDE COVER RH

HINT: Use the same procedures for the RH side and LH side.

22. REMOVE RECLINING ADJUSTER INSIDE COVER LH

REMOVE RECLINING ADJUSTER INSIDE COVER LH

  1.  Remove the screw and the reclining adjuster inside cover LH (upper).

23. REMOVE RECLINING ADJUSTER INSIDE COVER RH

HINT: Use the same procedures for the RH side and LH side.

24. REMOVE FRONT SEAT CUSHION SHIELD LOWER LH

REMOVE FRONT SEAT CUSHION SHIELD LOWER LH

  1.  Using a screwdriver, disengage the claws and remove the front seat cushion shield lower LH.

HINT: Tape the screwdriver tip before use.

25. REMOVE FRONT SEAT CUSHION SHIELD LOWER RH

HINT: Use the same procedures for the RH side and LH side.

Removal
CAUTION:  Wear safety gloves, because the sharp surfaces of the seatback frame and seat adjuster may injure your hand.  Work must be started more than 90 seconds after the igniti ...

Reassembly
1. INSTALL FRONT SEAT CUSHION SHIELD LOWER LH  Install the front seat cushion shield lower LH. 2. INSTALL FRONT SEAT CUSHION SHIELD LOWER RH 3. INSTALL RECLINING ADJUSTER INSIDE COVER LH ...

Other materials:

Data list / active test
1. DATA LIST HINT: Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered ...

Diagnostic trouble code chart
1. DTCS FOR OCCUPANT CLASSIFICATION SYSTEM If a trouble code is displayed during the DTC check, check the circuit listed for the code in the table below (proceed to the page listed for that circuit). HINT: When DTC B1150/23 is detected as a result of troubleshooting for the airbag system, pe ...

Precaution
NOTICE: Because the compressor operates at high voltages, wear electric insulated gloves and pull out the service plug to cut the high-voltage circuit before inspection. 1. DO NOT HANDLE REFRIGERANT IN AN ENCLOSED AREA OR NEAR AN OPEN FLAME 2. ALWAYS WEAR EYE PROTECTION 3. BE CAREFUL NOT ...

В© 2011-2024 Copyright www.tsienna.net