1. INSPECT UNDERDRIVE PACK CLEARANCE
HINT: (See page AX-262)
2. REMOVE UNDERDRIVE CLUTCH FLANGE NO.2 HOLE SNAP RING
a) Using a screwdriver, remove the underdrive clutch flange No.2 snap ring.
3. REMOVE UNDERDRIVE CLUTCH DISC NO.1
(a) Remove the flange, 4 discs and 4 plates from the underdrive clutch drum.
4. REMOVE UNDERDRIVE CLUTCH RETURN SPRING SUB-ASSEMBLY
(a) Place SST on the clutch balancer and compress the spring with a press.
SST 09350-32014
(b) Using a snap ring expander, remove the snap ring.
NOTICE:
(c) Remove the clutch balancer from the underdrive clutch drum.
(d) Remove the return spring from the underdrive clutch drum.
5. REMOVE UNDERDRIVE CLUTCH PISTON SET
(a) Install the underdrive clutch to the transaxle case.
NOTICE: Be careful not to damage the oil seal ring.
(b) Holding the underdrive clutch piston by hand, apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) to the transaxle case to remove the underdrive clutch piston.
6. REMOVE UNDERDRIVE CLUTCH DRUM O-RING
(a) Using a screwdriver, remove the O-ring from the underdrive clutch drum.
System description
1. POWER MIRROR CONTROL SYSTEM DESCRIPTION
This system has these functions: automatic glare-resistant
electrochromic (EC) mirror, electrical remote control type
mirror, memory function, foot light function, and rear
window defogger-linked mirror defogger.
2. FUNCTION OF MAIN COMPONENT
...
Child restraint systems with a top tether strap (third seat)
Center seat
Secure the child restraint
system using the seat belt or
LATCH anchors. Adjust the
head restraint to the uppermost
position.
Latch the hook onto the
anchor bracket and tighten
the top tether strap.
Make sure the top tether strap is
securely latched.
...
Fuel information
You must only use unleaded gasoline in your vehicle.
Select octane rating 87 (Research Octane Number 91) or higher.
Use of unleaded gasoline with an octane rating lower than 87
may result in engine knocking. Persistent knocking can lead to
engine damage.
At minimum, the gasoline you use s ...