Toyota RAV4 manuals

Toyota Sienna 2010-2024 Owners Manual: Display contents

The multi-information display presents the driver with a variety of vehicle data.

Toyota Sienna. Display contents


Displays the following information when an icon is selected.

Some of the information may be displayed automatically depending on the situation.

Drive information


Select to display various drive data.

Navigation system-linked display
(if equipped)

Select to display the following navigation system-linked information.

Audio system-linked display


Select to enable selection of an audio source or track on the meter using the meter control switches.

Cruise control display (if
equipped)

Select to display the information and operation procedures of the cruise control.

Dynamic radar cruise control
display (if equipped)

Select to display the information and operation procedures of the dynamic radar cruise control. The tab will change to
when the vehicle is in constant
speed control mode.

Warning message display


Select to display warning messages and measures to be taken if a malfunction is detected.

Settings display


Select to change the meter display settings.

Automatically displayed when the system is used

Multi-information display (with color display)
...

Operating the meter control switches
The multi-information display is operated using the meter control switches. Enter/Set Select an item/Change pages Return to the previous screen Press: Displays the screen registered ...

Other materials:

Right Front Wheel Speed Sensor Signal
DESCRIPTION The speed sensor detects wheel speed and sends the appropriate signals to the ECU. These signals are used to control the ABS control system. The front and rear rotors have 48 serrations each. When the rotors rotate, the magnetic field emitted by the permanent magnet in t ...

Vehicle Speed Signal Circuit between Multi-display and Combination Meter
DESCRIPTION This circuit is necessary for the ASL (Auto Sound Leveliser) built into the radio receiver. Speed signals are received from the combination meter and used for the ASL. The ASL function automatically adjusts the sound data in order to enable hearing the clear audio sound even ...

Installation
1. Install heated oxygen sensor (for bank 2 sensor 2) (see page ec-34) 2. Install front exhaust pipe assembly (a) Install 2 new gaskets to the front exhaust pipe assembly. (b) Install the front exhaust pipe assembly with the 4 nuts. Torque: 62 n*m (632 kgf*cm, 46 ft.*Lbf) 3. INSTALL CE ...

В© 2011-2024 Copyright www.tsienna.net