Toyota Sienna 2010-2024 Owners Manual: Display settings

Toyota Sienna 2010-2024 Owners Manual / Audio system / Setup / Display settings

Settings are available for adjusting the contrast and brightness of the screen.

Screen for display settings

Press the “SETUP” button.
Select “Display” on the “Setup” screen.

Toyota Sienna. Screen for display settings

Adjust screen contrast/brightness
Adjust screen contrast/brightness of the rear view monitor camera
Changes to day mode.

Adjusting the screen contrast/brightness

Select “General” or “Camera” on the “Display Settings” screen.
Adjust the display as desired by selecting “+” or “-”.

Day mode

When the headlights are turned on, the screen dims.

However, the screen can be switched to day mode by selecting “Day Mode”.

The screen will stay in day mode when the headlights are turned on until “Day Mode” is selected again.

Automatic sound leveliser (ASL)

Select “Automatic Sound Levelizer”. Select “High”, “Mid”, “Low” or “Off”. About Automatic Sound Leveliser (ASL) ASL automatically adjusts the volume and tone quality accor ...

Voice settings

This screen is used for guidance for voice command systems setting. Adjust the voice guidance volume setting. Set the voice recognition prompts “High”, “Low” or “Off”. Set ...

Other materials:

Noise Occurs
INSPECTION PROCEDURE 1 NOISE CONDITION Check in which direction the noise comes from (front left or right, or rear left or right). Check in which direction the noise comes from. OK: The location of the noise source can be determined 2 CHECK SPEAKERS Check the installatio ...

Installation
1. TEMPORARILY TIGHTEN AIR CONDITIONING UNIT ASSEMBLY (a) Engage the 2 claws. (b) Temporarily tighten the air conditioning unit assembly with the nut. Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf) 2. INSTALL LOWER DEFROSTER NOZZLE ASSEMBLY (a) Engage the 4 claws and install the lower defr ...

Reassembly
1. INSTALL BACK DOOR STOPPER LOWER Install the 2 stoppers with the 4 bolts. Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 2. INSTALL BACK DOOR BASE STOPPER BRACKET Install the 2 stopper brackets with the 4 bolts. Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 3. INSTALL BACK DOOR LOCK ASSEMBLY ...