Toyota RAV4 manuals

Toyota Sienna Service Manual: Disposal

HINT: When scrapping a vehicle equipped with the SRS or disposing of the front passenger airbag assembly, be sure to deploy the airbag first in accordance with the procedure described below. If any abnormality occurs with airbag deployment, contact the SERVICE DEPT. of the TOYOTA MOTOR SALES, U.S.A., INC.

CAUTION:

1. DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE)

DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE)

HINT: Prepare a battery as the power source to deploy the airbag.

  1.  Check the function of the SST (25).
  2.  Precaution.
  3.  Disconnect the cable from the negative battery terminal.

    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

  4.  Remove the instrument panel box No. 2.
  5.  Remove the glove compartment door assembly.

DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE)

  1. Install the SST.
  1.  Disconnect the connector from the front passenger airbag assembly.

    NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

  2.  Connect the SST connector to the front passenger airbag assembly.

    SST 09082-00700, 09082-00780 NOTICE: To avoid damaging the SST connector and wire harness, do not lock the secondary lock of the twin lock.

DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE)

  1. Move the SST at least 10 m (33 ft) away from the vehicle front side window.
  2. Maintaining enough clearance for the SST wire harness in the front side window, close all doors and windows of the vehicle.

    NOTICE: Take care not to damage the SST wire harness.

  3.  Connect the red clip of the SST to the battery positive (+) terminal and the black clip of the SST to the negative (-) terminal.
  1.  Deploy the airbag.
  1.  Check that no one is inside the vehicle or within a 10 m (33 ft) radius of the vehicle.
  2.  Press the SST activation switch and deploy the airbag.

CAUTION:

HINT: The airbag is deployed as the LED of the SST activation switch comes on.

2. DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)

NOTICE:

HINT: Prepare a battery as the power source to deploy the airbag.

DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)

  1.  Check the function of the SST (25).
  2.  Remove the front passenger airbag assembly (38).

CAUTION:

DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)

  1. Using a service-purpose wire harness for the vehicle, tie down the front passenger airbag assembly to the tire.

    Wire harness: Stripped wire harness section: 1.25 mm2 or more (0.0019 in.2 or more)

CAUTION: If the wire harness is too thin or an alternative object is used to tie down the front passenger airbag assembly, it may be snapped by the shock when the airbag is deployed. Always use a wire harness for vehicle use with an area of at least 1.25 mm2 (0.0019 in.2). HINT: To calculate the area of the stripped wire harness section: Area = 3.14 x (Diameter)2 divided by 4

  1. Position the front passenger airbag assembly inside the tire with the airbag deployment side facing inside

DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)

Tire size:
Must exceed the following dimensions
Width:
185 mm (7.28 in.)
Inner diameter:
360 mm (14.17 in.)

CAUTION:

NOTICE: The tire will be damaged by airbag deployment, so use an extra tire.

DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)

  1.  Install the SST.
  1.  Connect the SST connector to the front passenger airbag assembly.

    SST 09082-00700, 09082-00780

DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)

  1. Place the tires.
  1. Place at least 2 tires under the tire which the front passenger airbag assembly is tied to.
  2.  Place at least 2 tires over the tire which the front passenger airbag assembly is tied to. The top tire should have a disc wheel installed.

NOTICE: Do not place the SST connector under the tire because it could be damaged.

DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)

  1. Tie the tires together with 2 wire harnesses.

CAUTION: Make sure that the wire harness is tight.

Looseness in the wire harness results in the tires coming free due to the shock when the airbag is deployed.

DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)

  1. Install the SST.
  1.  Connect the SST connector.

    SST 09082-00700

NOTICE: To avoid damaging the SST connector and wire harness, do not lock the secondary lock of the twin lock. Also, secure some slack for the SST wire harness inside the tire.

  1.  Move the SST at least 10 m (33 ft) away from the airbag tied down to the tires.
  1.  Deploy the airbag.
  1.  Connect the red clip of the SST to the battery positive (+) terminal and the black clip of the SST to the negative (-) terminal.
  2.  Check that no one is within a 10 m (33 ft) radius of the tire which the front passenger airbag assembly is tied to.
  3.  Press the SST activation switch and deploy the airbag.

CAUTION: When deploying the airbag, make sure that no one is near the tire. HINT: The airbag is deployed as the LED of the SST activation switch comes on.

DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)

  1. Dispose of the front passenger airbag assembly.

CAUTION:

  1.  Remove the front passenger airbag assembly from the tire.
  2.  Place the front passenger airbag assembly in a plastic bag, tie it tightly and dispose of it as other general part disposal.
Installation
1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY  Install the front passenger airbag assembly with the 2 screws. 2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY 3. CONNECT FRONT PASSENGER AIRBAG ...

Curtain shield airbag assembly
COMPONENTS ...

Other materials:

Light Sensor Circuit Malfunction
DTC B1244 Light Sensor Circuit Malfunction DESCRIPTION This DTC is output when failure in the light sensor circuit is detected. DTC No. DTC Detection Condition Trouble Area B1244 Malfunction of automatic light control sensor Open or short of a ...

Short in Front Pretensioner Squib LH Circuit
DTC B0135/73 Short in Front Pretensioner Squib LH Circuit DESCRIPTION The front pretensioner squib LH circuit consists of the center airbag sensor assembly and the front seat outer belt assembly LH. This circuit instructs the SRS to deploy when deployment conditions are met. DTC B0135/73 ...

Short to B+ in Side Squib RH Circuit
DTC B0113/42 Short to B+ in Side Squib RH Circuit DESCRIPTION The side squib RH circuit consists of the center airbag sensor assembly and the front seat side airbag assembly RH. This circuit instructs the SRS to deploy when deployment conditions are met. DTC B0113/42 is recorded when a sh ...

В© 2011-2024 Copyright www.tsienna.net