Toyota Sienna 2010-2024 Owners Manual: Drive information
- Average fuel economy*1, 2
Displays the average fuel consumption since the function was
reset.*3
- Tank average fuel economy*1, 2
Displays the average fuel consumption since the vehicle was refueled.
- Trip average fuel economy*1, 2
Displays the average fuel consumption since the engine was
started.
- Current fuel economy*1, 2
Displays the current rate of fuel consumption.
- Distance to empty*1
Displays the estimated maximum distance that can be driven with
the quantity of fuel remaining.
- This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ
from that displayed.
- When only a small amount of fuel is added to the tank, the display
may not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled
without turning the engine switch off, the display may not be
updated.
- Trip distance*1
Displays the driving distance after the engine was started.
- Distance*1
Displays the driving distance since the function was reset.*3
- Trip elapsed time*1
Displays the elapsed time since the function was reset.*3
- Elapsed time*1
Displays the elapsed time since the engine was started.
- Trip average speed*1
Displays the average vehicle speed since the function was reset.*3
- Average speed*1
Displays the average vehicle speed since the engine was started.
- AWD control (if equipped)
Displays the torque distribution between the front and rear axles of
the AWD control system
- Display off
A blank screen is displayed.
*1: Can be registered to Drive information 1 through 3.
*2: Use the displayed fuel consumption as a reference.
*3: Resetting procedures:
- Select a function to be reset using the meter control switches and
then
press and hold to reset.
- If there is more than one function that can be reset, check boxes
will be
displayed next to those functions.
The multi-information display is
operated using the meter control
switches.
Enter/Set
Select an item/Change pages
Return to the previous screen
Press: Displays the screen registered
...
The settings of the following items can be changed, refer to
Language
Select to change the language on the display.
Units
Select to change the unit for measure of the fuel consumption and
...
Other materials:
Removal
1. Remove engine under cover no.1
2. Disconnect cable from negative battery
terminal
3. Drain automatic transaxle fluid (see page
ax-131)
4. Remove automatic transaxle oil pan subassembly
(a) Remove the 18 bolts, oil pan and gasket.
NOTICE:
Some fluid will remain in the oil pan. ...
Disassembly
1. REMOVE LOWER BALL JOINT ASSEMBLY FRONT LH
(a) Remove the cotter pin and nut.
(b) Using SST(s), remove the lower ball joint assembly
front LH.
SST 09628-62011
2. REMOVE FRONT WHEEL BEARING DUST DEFLECTOR NO.1 LH
(a) Using a screwdriver, remove the bearing dust
deflector NO. 1 LH ...
Wrong Disc/ Disc cannot be Read
DTC 44-41 Wrong Disc
DTC 44-42 Disc cannot be Read
DESCRIPTION
DTC No.
DTC Detecting Condition
Trouble Area
44-41
An unsuitable disc is inserted
DVD
Television display assembly
44-42
The disc cannot be read.
IN ...