Toyota Sienna 2010-2024 Owners Manual: Driving tips

Toyota Sienna 2010-2024 Owners Manual / Driving / Driving tips

Winter driving tips

Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropriate to the prevailing weather conditions.

Preparation for winter

Use fluids that are appropriate to the prevailing outside temperatures.

Engine oil
Engine coolant
Washer fluid

Have a service technician inspect the condition of the battery.
Have the vehicle fitted with four snow tires or purchase a set of tire chains for the front tires.
Ensure that all tires are the same size and brand, and that chains match the size of the tires.

Before driving the vehicle

Perform the following according to the driving conditions:

Do not try to forcibly open a window or move a wiper that is frozen.
Pour warm water over the frozen area to melt the ice. Wipe away the water immediately to prevent it from freezing.
To ensure proper operation of the climate control system fan, remove any snow that has accumulated on the air inlet vents in front of the windshield.
Check for and remove any excess ice or snow that may have accumulated on the exterior lights, vehicle’s roof, chassis, around the tires or on the brakes.
Remove any snow or mud from the bottom of your shoes before getting in the vehicle.

When driving the vehicle

Accelerate the vehicle slowly, keep a safe distance between you and the vehicle ahead, and drive at a reduced speed suitable to road conditions.

When parking the vehicle

Park the vehicle and move the shift lever to P without setting the parking brake. The parking brake may freeze up, preventing it from being released. If necessary, block the wheels to prevent inadvertent sliding or creeping.

Selecting tire chains

Use the tire chains of correct size and type.

Use SAE Class “S” type radial tire chains, with the exception of radial cable chains or V-bar type chains.

Regulations on the use of tire chains

Regulations regarding the use of tire chains vary depending on location and type of road. Always check local regulations before installing chains.

Tire chain installation

Observe the following precautions when installing and removing chains.

Install and remove tire chains in a safe location.
Install tire chains on the front tires only. Do not install tire chains on the rear tires.
Install tire chains on front tires as tightly as possible. Retighten chains after driving 1/4 - 1/2 mile (0.5 - 1.0 km).
Install tire chains following the instructions provided with the tire chains.

WARNING

Driving with snow tires

Observe the following precautions to reduce the risk of accidents.

Failing to do so may result in a loss of vehicle control and cause death or serious injury.

Use tires of the specified size.
Maintain the recommended level of air pressure.
Do not drive in excess of 75 mph (120 km/h), regardless of the type of snow tires being used.
Use snow tires on all, not just some wheels.

Driving with tire chains

Observe the following precautions to reduce the risk of accidents.

Failing to do so may result in the vehicle being unable to be driven safely, and may cause death or serious injury.

Do not drive in excess of the speed limit specified for the tire chains being used or 30 mph (50 km/h), whichever is lower.
Avoid driving on bumpy road surfaces or over potholes.
Avoid sudden acceleration, abrupt steering, sudden braking and shifting operations that cause sudden engine braking.
Slow down sufficiently before entering a curve to ensure that vehicle control is maintained.

NOTICE

Repairing or replacing snow tires

Request repairs or replacement of snow tires from Toyota dealers or legitimate tire retailers.

This is because the removal and attachment of snow tires affects the operation of the tire pressure warning valves and transmitters.

Fitting tire chains

The tire pressure warning valves and transmitters may not function correctly when tire chains are fitted.

The Rear Cross Traffic Alert function detection areas

The areas that vehicles can be detected in are outlined below. To give the driver a more consistent time to react, the buzzer can alert for faster vehicles from farther away. Example: Th ...

Audio system

...

Other materials:

Reassembly
1. INSTALL UNDERDRIVE CLUTCH DRUM O-RING (a) Coat a new O-ring with ATF, and install it to the underdrive clutch drum. NOTICE: Make sure that the O-ring is not twisted or pinched. 2. INSTALL UNDERDRIVE CLUTCH PISTON SET (a) Coat the underdrive clutch piston with ATF, and install it t ...

Gauges and meters
The displayed content may differ depending on the type of meter. Vehicles with monochrome display Vehicles with color display Tachometer Displays the engine speed in revolutions per minute Multi-information display Presents the driver with a variety of driving-related d ...

Front No. 2 speaker
COMPONENTS ON-VEHICLE INSPECTION 1. INSPECT FRONT NO.2 SPEAKER HINT: Remove interior parts so that the front No.2 speaker can be seen. Check the speaker installation. OK: The speaker is securely installed. If the result is not as specified, reinstall the front No.2 speak ...