DTC 44-44 DVD Error
DTC 44-48 Excess Current
DTC 44-50 Tray Insertion / Ejection Error
DESCRIPTION
DTC No. |
DTC Detection Condition |
Trouble Area |
44-44 | Operation error in the DVD mechanism | Television display assembly |
44-48 | Excess current is present in the DVD player | |
44-50 | Malfunction in insertion/ejection system |
INSPECTION PROCEDURE
HINT: After the inspection is completed, clear the DTCs.
1 CLEAR DTC
2 RECHECK DTC
HINT: If DTCs are detected frequently, replace the television display assembly.
OK: Malfunction disappears.
END
Manual Up / Down and Auto Down Function does not Operate on
Driver Side
DESCRIPTION
If the manual UP/DOWN function does not operate, no power may be supplied to
the power window
master switch or the power window motor. The power window master switch itself
or the wire harness may
be malfunctioning.
WIRING DIAGRAM
INSPECTION PROCEDURE
1 INSPECT FUSE (P/W)
...
ECU Power Source Circuit
DESCRIPTION
The position control ECU and switch assembly (power seat control switch and
ECU) is contained in the
switch assembly.
During manual operation, only one switch signal is accepted. If signals are
input from 2 or more switches
simultaneously, all of them are ignored, except when s ...
Automatic door locking and unlocking systems
The following functions can be set or cancelled: For instructions on
customizing, refer to
Function
Operation
Shift position linked door
locking function
Shifting the shift lever out of P locks all the
doors
Shift position linked door
unlocking function
...