Toyota RAV4 manuals

Toyota Sienna Service Manual: DVD Player Mechanical Error/ DVD Insertion and Ejection Error/ DVD Reading Abnormal

Toyota Sienna Service Manual / Navigation / Navigation system / Diagnostic trouble code chart / DVD Player Mechanical Error/ DVD Insertion and Ejection Error/ DVD Reading Abnormal

DTC 44-10 DVD Player Mechanical Error

DTC 44-11 DVD Insertion and Ejection Error

DTC 44-12 DVD Reading Abnormal

DESCRIPTION

TC No.

DTC Detection Condition

Trouble Area

44-10 A mechanical error in the DVD player is detected while the DVD is not being inserted or ejected. Television display assembly
44-11 DVD insertion or ejection is failed.
44-12 DVD read problem occurs.

INSPECTION PROCEDURE

HINT: After the inspection is completed, clear the DTCs.

1 REPLACE TELEVISION DISPLAY ASSEMBLY

END

Error in Picture Circuit/ No Current in Back-light/ Excess Current in Back-light
DTC 34-10 Error in Picture Circuit DTC 34-11 No Current in Back-light DTC 34-12 Excess Current in Back-light DESCRIPTION DTC No. DTC Detection Condition Trouble Area ...

Wrong Disc/ Disc cannot be Read
DTC 44-41 Wrong Disc DTC 44-42 Disc cannot be Read DESCRIPTION DTC No. DTC Detection Condition Trouble Area 44-41 An unsuitable disc is inserted DVD ...

Other materials:

Diagnosis system
1. CHECK DLC3  The vehicle's ECU uses ISO 15765-4 for communication protocol. The terminal arrangement of the DLC3 complies with SAE J1962 and matches the ISO 15765-4 format. NOTICE: *: Before measuring the resistance, leave the vehicle as is for at least 1 minute and do not ...

Air Intake Control Circuit
DESCRIPTION The air cleaner is equipped with two inlets, one of which is opened or closed by the Air Intake Control Valve (AICV). This system reduces intake noise and increases engine power at low-to-high engine speed range. When the engine is operating in the low-to-mid speed range, this ...

Input instructions
(a) The general VIN input instructions using the intelligent tester are shown below: (b) The arrow buttons (UP, DOWN, RIGHT and LEFT) and numerical buttons (0 to 9) are used to input the VIN. (c) Cursor Operation To move the cursor around the tester screen, press the RIGHT and LEFT buttons. ...

В© 2011-2024 Copyright www.tsienna.net