ON-VEHICLE INSPECTION
1. INSPECT A/C EVAPORATOR TEMPERATURE SENSOR
(a) Remove the A/C evaporator temperature sensor (A/ C thermistor).
(b) Disconnect the connector from the A/C evaporator temperature sensor (A/C thermistor).
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance
NOTICE:
HINT: As the temperature increases, the resistance decreases (see the graph).
If the resistance is not as specified, replace the A/C evaporator temperature sensor (A/C thermistor).
Removal
1. Disconnect cable from negative battery
terminal
2. REMOVE STEERING COLUMN COVER LOWER
(A) insert the key into the ignition key cylinder and
release the steering lock.
(B) turn the steering wheel clockwise to gain access to
the screw and remove the screw.
(c) Turn the steering whe ...
Power Slide Door LH does not Operate When Satellite Switch is
Pressed
DESCRIPTION
The power slide door operates only when the power slide door main
switch is ON (switch free: orange
paint on the top of the switch appears). The power slide door ECU LH
controls the power slide door LH,
which activates the slide door motor to open / close the slide do ...
Rear Occupant Classification Sensor LH Circuit
Malfunction
DTC B1782 Rear Occupant Classification Sensor LH Circuit
Malfunction
DESCRIPTION
The rear occupant classification sensor LH circuit consists of the occupant
classification ECU and the rear
occupant classification sensor LH.
DTC B1782 is recorded when a malfunction is detected in the rear oc ...