Toyota Sienna 2010-2024 Owners Manual: Fastening the seat belt (for the third center seat)
- Take the plate out of the holder, and then pull down the seat belt.
- Push plate “A” into buckle “A” until a click sound is heard.
- Push plate “B” into buckle “B” until a click sound is heard.
Fastening and releasing the seat belt (except for the third center
seat)
To fasten the seat belt, push the
plate into the buckle until a click
sound is heard.
To release the seat belt, press
the release button.
...
Releasing and stowing the seat belt (for the third center seat)
To release plate “B”, press the
release button on buckle “B”.
To release plate “A”, insert the
key or plate “B” into
the hole on buckle “A”.
Retract the be ...
Other materials:
Rear Occupant Classification Sensor RH Collision
Detection
DTC B1788 Rear Occupant Classification Sensor RH Collision
Detection
DESCRIPTION
DTC B1788 is output when the occupant classification ECU receives a collision
detection signal sent by
the rear occupant classification sensor RH if an accident occurs.
DTC B1788 is also output when the front s ...
Removal
1. REMOVE EXHAUST PIPE ASSEMBLY
(a) Remove exhaust pipe assembly (See page EX-8).
2. REMOVE PROPELLER W/CENTER BEARING SHAFT ASSEMBLY
(a) Depress the brake pedal and hold it down.
(b) Using a hexagon wrench (6 mm), loosen the cross
groove joint set bolts a half turn.
HINT:
Place a cloth ...
On-vehicle inspection
1. INSPECT COOLING FAN SYSTEM
(a) Put the vehicle in the following conditions
(1) The engine switch is off.
(2) The coolant temperature is less than 95°C
(203°F).
(3) The battery voltage is between 9 and 14 V.
(4) The A/C switch is OFF.
(b) Clamp the 400 A probe of an ammeter over the ...
