Toyota Sienna Service Manual: Forward clutch

Reassembly

1. INSTALL 2ND BRAKE PISTON O-RING (a) Coat 2 new O-rings with ATF, and install them in the 2nd brake piston. NOTICE: Make sure that the O-ring is not twisted or pinched. 2. INSTALL 2ND BRAK ...

Disassembly

1. INSPECT PACK CLEARANCE OF FORWARD CLUTCH HINT: (See page AX-242) 2. REMOVE FORWARD MULTIPLE DISC CLUTCH DISC (a) Using a screwdriver, remove the snap ring. (b) Remove the flange, 5 di ...

Other materials:

System description
1. Radio and navigation assembly outline  Conventionally, 2 separate devices, a "radio and display" and a "navigation ECU" are used. This model has adopted a new type, combining these devices into a single unit. 2. Navigation system outline  Vehicle ...

Data list / active test
1. DATA LIST HINT: By the DATA LIST displayed by the intelligent tester, you can read the value of the switch, sensor, actuator and so on without removing any part. Reading the DATA LIST as the first step in troubleshooting is one of the methods to shorten the labor time.  Connect the ...

Removal
1. PRECAUTION CAUTION: Be sure to read "PRECAUTION" thoroughly before servicing. 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working. 3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 4. REMOVE STEE ...