DTC B1148/36 Front Airbag Sensor RH Circuit Malfunction
DESCRIPTION
The front airbag sensor RH circuit consists of the center airbag sensor assembly and front airbag sensor RH. If the center airbag sensor assembly receives signals from the front airbag sensor RH, it judges whether or not the SRS should be activated.
DTC B1148/36 is recorded when a malfunction is detected in the front airbag sensor RH circuit.
WIRING DIAGRAM
INSPECTION PROCEDURE
1 CHECK DTC
OK: DTC B1148/36 is not output.
HINT: Codes other than DTC B1148/36 may be output at this time, but they are not related to this check.
USE SIMULATION METHOD TO CHECK
2 CHECK CONNECTION OF CONNECTORS
OK: The connectors are connected.
3 CHECK FRONT AIRBAG SENSOR RH CIRCUIT (OPEN)
NOTICE: Do not forcibly insert a service wire into the terminals of the connector when connecting.
Standard resistance
4 CHECK FRONT AIRBAG SENSOR RH
Result
HINT: Codes other than DTC B1148/36 and B1149/37 may be output at this time, but they are not related to this check.
USE SIMULATION METHOD TO CHECK
5 CHECK INSTRUMENT PANEL WIRE (OPEN)
HINT: The service wire has already been inserted into connector "B".
Standard resistance
REPAIR OR REPLACE ENGINE ROOM MAIN WIRE
Terminals of ECU
1. CENTER AIRBAG SENSOR ASSEMBLY (w/ Side
Airbag)
2. CENTER AIRBAG SENSOR ASSEMBLY (w/o Side
Airbag)
...
Lost Communication with Radar Sensor
DTC U1102 Lost Communication with Radar Sensor
DESCRIPTION
The laser sensor and distance control ECU transmit the data for general
vehicle control and diagnosis
function along the communication line. The distance control ECU determines the
curve radius information
based on signals from the s ...
ON / OFF Indication Parameter Error
DTC 01-E2 ON / OFF Indication Parameter Error
DESCRIPTION
DTC No.
DTC Detection Condition
Trouble Area
01-E2
The command for ON/OFF control from the master
device has a problem.
Radio receiver
INSPECTION PROCEDURE
HINT:
After the inspection is ...