Toyota Sienna Service Manual: Front stabilizer bar (for 2wd)

Installation

1. INSTALL LOWER BALL JOINT ASSEMBLY FRONT LH (a) Install the lower ball joint assembly front LH and tighten the nut. Torque: 123 N*m (1,250 kgf*cm, 91 ft.*lbf) (b) Install a new cotter pin. NO ...

Removal

1. REMOVE FRONT WHEELS 2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH (a) Remove the 2 nuts and front stabilizer link assembly LH. HINT: If the ball joint turns together with the nut, use a hex ...

Other materials:

ECM / PCM Internal Engine Off Timer Performance
DTC SUMMARY DESCRIPTION To ensure the accuracy of the EVAP (Evaporative Emission) monitor values, the soak timer, which is built into the ECM, measures 5 hours (+/- 15 minutes) from when the ignition switch is turned off, before the monitor is run. This allows the fuel to cool down, whic ...

Screen Flicker or Color Distortion
INSPECTION PROCEDURE 1 CHECK DISPLAY SETTING Enter the display adjustment screen by pressing the "DISPLAY" switch.  Reset display settings (contrast, brightness) and check that the screen appears normal Press the "INFO" switch and then select "S ...

Mobile Assistant
The Mobile Assistant feature will activate Apple’s Siri® Eyes Free mode via the steering wheel switches. To operate the Mobile Assistant, a compatible cellular phone must be registered and connected to this system via Bluetooth®. Press and hold the until you hear the beeps ...