Toyota Sienna 2010-2024 Owners Manual: Heated steering wheel/seat heaters

Toyota Sienna 2010-2024 Owners Manual / Interior features / Using the air conditioning system and defogger / Heated steering wheel/seat heaters

Heated steering wheel and seat heaters heat the side grips of the steering wheel and seats, respectively.

WARNING

Care should be taken to prevent injury if anyone in the following categories comes in contact with the steering wheel and seats when the heater is on:

Babies, small children, the elderly, the sick and the physically challenged
Persons with sensitive skin
Persons who are fatigued
Persons who have taken alcohol or drugs that induce sleep (sleeping drugs, cold remedies, etc.)

Observe the following precautions to prevent minor burns or overheating:

Do not cover the seat with a blanket or cushion when using the seat heater.
Do not use seat heater more than necessary.

NOTICE

Do not put heavy objects that have an uneven surface on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.
To prevent battery discharge, do not use the functions when the engine is not running.

Air outlets

Location of air outlets The air outlets and air volume changes according to the selected air flow mode. Adjusting the position of the air outlets Direct air flow to the front or rear, up or ...

Heated steering wheel

Turns the heated steering wheel on/off The indicator light comes on when the heated steering wheel is operating. The heated steering wheel can be used when the engine switch is in IGNITI ...

Other materials:

Adjustment
1. VEHICLE PREPARATION FOR FOG LIGHT AIMING Prepare the vehicle: Ensure there is no damage or deformation to the body around the fog lights. Fill the fuel tank. Make sure that the oil is filled to the specified level. Make sure that the coolant is fi ...

Before driving
Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secu ...

Removal
1. Remove rear wheel 2. Remove exhaust pipe assembly Hint: (see page ex-8) 3. Remove propeller with center bearing shaft assembly Hint: (see page pr-3) 4. REMOVE REAR DIFFERENTIAL FILLER PLUG (A) using a hexagon wrench (10 mm), remove the filler plug and gasket. 5. Remove rear differentia ...