Toyota Sienna Service Manual: High Temperature
DTC 44-47 High Temperature
DESCRIPTION
|
DTC No. |
DTC Detecting Condition |
Trouble Area |
|
44-47 |
Sensor detects that DVD unit temperature is high.
(Over 80C) |
Television display assembly |
INSPECTION PROCEDURE
HINT: After the inspection is completed, clear the DTCs
1 CHECK TELEVISION DISPLAY ASSEMBLY
- Park the vehicle in a cool place.
- Check that the temperature of the television display
assembly becomes sufficiently low, and start the engine.
Check that the malfunction disappears.
OK: Malfunction disappears.
END
Scratched / Reversed Disc
DTC 44-46 Scratched / Reversed Disc
DESCRIPTION
DTC No.
DTC Detecting Condition
Trouble Area
44-46
Scratches or dirt is found on DVD surface or DVD is set
...
DSP Error
DTC 44-78 DSP Error
DESCRIPTION
DTC No.
DTC Detecting Condition
Trouble Area
44-78
An error occurs during the decode process (MP3/
WMA).
-
IN ...
Other materials:
Pressure Control Solenoid "D" Electrical (Shift
Solenoid Valve SLT)
DESCRIPTION
The linear solenoid valve (SLT) controls the transmission line pressure for
smooth transmission operation
based on signals from the throttle position sensor and the vehicle speed sensor.
The ECM adjusts the
duty cycle of the SLT solenoid valve to control hydraulic line pressure co ...
Installation
HINT:
Install the RH side by the same procedure as the LH side.
1. INSTALL FRONT DISC BRAKE CYLINDER SLIDE BUSH
(a) Apply the lithium soap base glycol grease to a new
front disc brake cylinder slide bush.
(b) Install the cylinder slide bush to the bottom side of
the front disc brake cyli ...
Installation
1. INSTALL REAR NO. 2 SEAT ASSEMBLY
Lock the seat leg rear to the floor striker.
Lock the seat leg front to the floor striker.
Install the rear No. 2 seat assembly with the 8 bolts.
Torque: 19 N*m (194 kgf*cm, 14 ft.*lbf)
NOTICE:
Tighten the bolts in the order sho ...
