HINT:
1 VEHICLE BROUGHT TO WORKSHOP
2 PROBLEM SYMPTOM CONFIRMATION
3 CHECK MULTIPLEX COMMUNICATION SYSTEM*
Refer to HOW TO PROCEED WITH TROUBLESHOOTING.
Result
HINT: The ECM of this system is connected to the multiplex communication system. Therefore, before starting troubleshooting, make sure to check that there is no trouble in the multiplex communication system.
4 CHECK CAN COMMUNICATION SYSTEM*
Refer to PRECAUTION.
Result
HINT: The ECM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, make sure to check that there is no trouble in the CAN communication system.
5 DTC CHECK AND CLEAR*
Refer to DTC CHECK / CLEAR
6 DTC CHECK (OTHER THAN MPX AND CAN SYSTEM DTC)*
Result
7 DTC CHART
Refer to DIAGNOSTIC TROUBLE CODE CHART
8 PROBLEM SYMPTOM CONFIRMATION
Result
9 SYMPTOM SIMULATION
Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE
10 PROBLEM SYMPTOMS TABLE
Refer to PROBLEM SYMPTOMS TABLE
11 CIRCUIT INSPECTION
12 TERMINALS OF ECM
Refer to TERMINALS OF ECM
13 IDENTIFICATION OF PROBLEM
14 REPAIR OR REPLACE
15 CONFIRMATION TEST
END
Customize parameters
HINT:
The following items can be customized.
NOTICE:
When the customer requests a change in a function,
first make sure that customization of the function(s) is
possible.
Be sure to record the current settings before
customizing.
When troubleshooting a function, fir ...
Adjustment
HINT:
On the RH side, use the same procedures as on the LH side.
1. INSPECT SLIDE DOOR PANEL SUB-ASSEMBLY LH
Check that the clearance is within the standard
range.
Standard
2. ADJUST SLIDE DOOR PANEL SUB-ASSEMBLY LH
Using the SST, horizontally and vertically adjust the
do ...
Linked mirror function when reversing (if equipped)
When the mirror select switch is in the L or R position, the outside rear
view mirrors will automatically angle downwards when the vehicle is
reversing in order to give a better view of the ground.
To disable this function, move the mirror select switch to the neutral
position (between L and R ...