Toyota Sienna Service Manual: How to proceed with troubleshooting
HINT:
- Use these procedures to troubleshoot the power door lock control system.
- The intelligent tester should be used in steps 3 and 5.
1 VEHICLE BROUGHT TO WORKSHOP
2 CUSTOMER PROBLEM ANALYSIS
- Interview the customer to confirm the trouble
3 INSPECT COMMUNICATION FUNCTION OF MULTIPLEX COMMUNICATION SYSTEM (BEAN)
- Use the intelligent tester to check if the Multiplex Communication System (MPX) is functioning normally.
Result
4 PROBLEM SYMPTOMS TABLE
Result
5 OVERALL ANALYSIS AND TROUBLESHOOTING
- Terminals of ECU
- DATA LIST/ACTIVE TEST
6 REPAIR OR REPLACE
7 CONFIRMATION TEST
END
Parts location
...
Operation check
1. DOOR LOCK FAIL-SAFE
When a malfunction in the door control switch
(manual switch, interlocked with key operation) has
been detected, door lock/unlock operation becomes
disabled.
...
Other materials:
Removal and installation of fuel control parts
(a) PLACE FOR REMOVING AND INSTALLING FUEL
SYSTEM PARTS
(1) Work in a location with good air ventilation that
does not have welders, grinders, drills, electric
motors, stoves, or any other ignition sources.
(2) Never work in a pit or near a pit as vaporized
fuel will collect in those places. ...
Illumination Circuit
DESCRIPTION
Power is supplied to the radio receiver and steering pad switch illumination
when the light control switch is
in the TAIL or HEAD position.
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
The vehicle is equipped with an SRS (Supplemental Restraint System) which
includes
compon ...
Disassembly
1. REMOVE REAR NO. 2 SEAT COVER BEZEL
Remove the 5 screws.
Disengage the 5 claws and remove the rear No. 2
seat cover bezel.
2. REMOVE REAR SEAT RECLINING COVER LH
Remove the 2 screws.
Disengage the claw and remove the rear seat
reclining cover LH.
...
